Acerca de CBNL
Higher capacity, greater flexibility, increased cost savings - the leading licenced point-to-multipoint solution has just got smarter.
Cambridge Broadband Networks (CBNL) is the global market leader in licenced point-to-multipoint (PMP) microwave and millimeter wave solutions.
CBNL’s new range of FCC PMP solutions are faster to deploy and up to half the cost for a licensed high capacity link compared to point-to-point.
The result is a rapid ROI and transformation tower capacity of up to 13.2Gb/s.
¿Por qué elegir PMP con licencia?
The market-leading licensed PMP solution
The most cost effective path to multiple gigabit per second hub capacities - whether for backhaul (macro and small cell), fixed wireless (to the home and the enterprise), utility company networks or smart cities.
VectaStar delivers the optimum balance of price and performance:
• High capacity: 550Mb/s per link and up to 13.2Gb/s per tower/hub site
• Range: 26-28GHz: up to 5 miles at 99.99% (typical), 39GHz: 1-3 miles at 99.99% (typical)
• Carrier-grade: Guaranteed carrier-grade services (utilising licensed spectrum)
• Fast time to market: Simple and quick deployment compared to fiber or point-to-point wireless
• Cost effective: Saves up to 50 percent total cost of ownership compared to fiber and PTP
• Frequencies: 28GHz LMDS (A1 and A1 / A2 bands), 39GHz
• Spectrum: Nationwide availability of wide bands at 39GHz
• Proven deployment: Deployed in nine states, including five in New York. Global deployments exist in 45 countries, including for seven of the world’s largest top ten mobile operators
Solutions
Familias de productos CBNL
VectaStar 600VectaStar 600 is the latest evolution in the platform which supports 56MHz channels to offer higher capacity and greater flexibility. Key benefits: • Frequencies: 28GHz LMDS (A1 and A1 / A2 bands), 39GHz • Capacity: 500Mb/s per link and up to 13.2Gb/s per hub site • Range: 26-28GHz: up to 5 miles at 99.99% (typical), 39GHz: 1-3 miles at 99.99% (typical) • Quality of service: guaranteed carrier grade through licensed spectrum • Fast time to market: less than half the radios of PTP • Fast ROI: 50% CAPEX, OPEX and 50% TCO savings compared to fibre and PTP • Zero indoor footprint • Software enabled customer service capabilities for each remote terminal • <1ms round-trip latency • SyncE 1588 CBNL’s range of antennas provides the flexibility for bespoke capacity/coverage requirements: • 30 and 90 degree access point sector antennas • 8", 1', 2' and 3' remote terminal antennas |
CBNL RT 8in, 1ft, 2ft and 3ft AntennasThe CBNL 26-28GHz Remote Terminal (RT) antennas are designed for the VectaStar ODU-S and VectaStar 600 remote terminals. - Sizes: 8in, 1ft, 2ft and 3ft - Antenna type: parabolic dish - Range: up to 20km/12.7m - Frequency (GHz): 24.50 - 29.50 (including the LMDS frequency band) - Polarisations supported: vertical and horizontal |
CBNL AP 30 degree and 90 degree AntennasThe CBNL Access Point (AP) sectorized antennas are designed for the VectaStar ODU-S and VectaStar 600 access points. - Sizes: 30 and 90 degree - Antenna type: sectorized - Frequency (GHz): 24.50 - 29.50 (including the LMDS frequency band) - Polarisations supported: vertical and horizontal |
CBNL Radio ControllerThe VectaStar Radio Controller (RC) is an optional indoor unit which adds sector aggregation and redundancy for access points within a VectaStar network. The RC is a flexible, high capacity platform incorporating programmable high speed logic allowing software upgradability for future performance enhancements and support of current and new network standards. The RC supports up to eight APs and can aggregate traffic from up to 240 Remote Terminals, at one hub, onto one or more interfaces connected to the core network. Two SFP+ 10 Gigabit Ethernet (10GE) ports are also provided for core network interconnection since the total aggregate rate from a full set of sectors may exceed 1Gb/s. |
.