- Home
// Products - // Accessories
- // Transtector
- // Lightning Arrestors
Specifications:
|
ELECTRICAL SERVICE | ||
|
Transfer Rate |
CAT 5, 10/100Mb/s | |
|
Maximum Continuous Operating Voltage |
30VDC for POE circuits, 12VDC for Ethernet | |
|
Connector Style |
RJ-45, Metal Shielded Jack | |
|
Protected RJ-45 Pins |
Lines 1-2; 3-6; 4,5-7,8; All pins to GND | |
|
ELECTRICAL PERFORMANCE | ||
|
Suppressor Response Time (Max.) |
5ns | |
|
Turn-on Voltage |
Ethernet (Pins 1-2, 3-6) |
15V @ 5ma |
|
DC POE (Pins 4,5 – DC- & Pins 7,8 DC+) |
30V @ 5ma | |
|
Maximum Voltage Protection Level IEEE and GR-1089, 10/1000µs Long Wave |
Ethernet (Pins 1-2, 3-6) |
25Vp @ 100A 10/1000µs |
|
DC POE (Pins 4,5 – DC- & Pins 7,8 DC+) |
50Vp @ 100A 10/1000µs | |
|
MECHANICAL | ||
|
Enclosure Description: The suppressor is housed in a sealed PVC enclosure and mounted to a powder coated metal panel with overall dimensions of 17” tall (43cm), 11” wide (28cm) and 6” deep (15cm). The door opens from the right side and requires a full 12” clearance to open properly. The PVC enclosure has a UL 1863 Flame Retardant rating | ||
|
Weight |
7 lb (3.2kg) | |
|
ENVIRONMENTAL | ||
|
Operating Temperature |
20°C to +65°C | |
|
Storage Temperature |
20°C to +65°C | |
|
Relative Humidity |
90% | |
The CMM3 is designed to protect the Power Over Ethernet (POE) communications lines for Motorola Canopy Radio System arrays. Incorporating shielded RJ45 jacks, the protector circuit consists of dedicated 13V silicon avalanche suppressor diodes (SASD’s) for the Ethernet pins (1,2,3 and 6) and dedicated 30V SASD’s for the 24V POE pins (4,5 and 7,8). These SASD circuits provide the lowest voltage protection and fastest response time possible resulting in the highest radio interface integrity. Each of the eight (8) individual POE protection circuits are protected relative to the internal ground terminal, which is intended to be bonded to the best possible local ground system. The communications circuits plug into the CMM3 in series through RJ45 connectors arranged in horizontal pairs, stacked vertically on the protection assembly. This robust protection assembly is housed inside a non-metallic enclosure with bottom fed grommet ports for easy wiring and installation. For optimum protection, the internal Ground Terminal must be connected to the most effective (lowest impedance) earth ground available. The unit is provided with a powder coated metal back panel for ease of installation and mounting.
The CMM3 is designed to protect the Power Over Ethernet (POE) communications lines for Motorola Canopy Radio System arrays. Incorporating shielded RJ45 jacks, the protector circuit consists of dedicated 13V silicon avalanche suppressor diodes (SASD’s) for the Ethernet pins (1,2,3 and 6) and dedicated 30V SASD’s for the 24V POE pins (4,5 and 7,8). These SASD circuits provide the lowest voltage protection and fastest response time possible resulting in the highest radio interface integrity. Each of the eight (8) individual POE protection circuits are protected relative to the internal ground terminal, which is intended to be bonded to the best possible local ground system. The communications circuits plug into the CMM3 in series through RJ45 connectors arranged in horizontal pairs, stacked vertically on the protection assembly. This robust protection assembly is housed inside a non-metallic enclosure with bottom fed grommet ports for easy wiring and installation. For optimum protection, the internal Ground Terminal must be connected to the most effective (lowest impedance) earth ground available. The unit is provided with a powder coated metal back panel for ease of installation and mounting.
Ordering Information
| Part # | Recommended Quantity | Qty on Shelf Qty on PO |
List Price Your Price |
| 1101-805 |
If you would like to place an order by phone please call 1-888-WINNCOM (946-6266) (or +1 440 498 9510 for International)
PDF Documents
FILTER RESULTS
VIEW PRODUCTS
-
by CATEGORY
- Accessories
- Antennas
- Cables and Cable Assemblies
- Distributed Antenna Systems
- Installation and Diagnostic Tools
- Licensed Wireless Point to Multipoint Systems
- Licensed Wireless Point to Point Systems
- MESH Wireless Equipment
- Network and Network Management Systems
- Network Monitoring
- Site Solutions
- Unlicensed Wireless Point to Point Systems
- Video Surveillance Products
- Winncom Professional Services
- Wireless Broadband Wi-Fi Products WLAN
- Wireless WAN and LAN Point to Multipoint Systems
-
by MANUFACTURER
- 9dot
- ACTi
- AFL
- Airspan
- ALGcom
- Alpha Wireless
- Altowav
- Andrew
- Aranet
- Axis Communications
- Baicells
- BEC Technologies
- Bird
- Brickcom
- BridgeWave Communications
- Cambium Networks
- CBNL
- C-Data Technology
- Cel-Fi by Nextivity
- Ceragon
- Citel
- CommScope
- DDB Unlimited
- DeepBlue Telecom
- Druid Software
- DuraComm
- DZS
- Ericsson
- Extreme Networks
- Federated Wireless
- FIBRAIN
- Fibramerica
- Fiplex Communications
- Firetide
- FreeWave
- Gamma Electronics
- GLC tec
- GS Yuasa Energy Solutions
- ICT
- Integra Enclosures
- Intracom Telecom
- IP Infusion
- Itelite
- KP Performance Antennas
- Laird Connectivity
- LiteLinx
- MARS Antennas
- Microsemi by Microchip
- MikroTik
- Mimosa
- Mobile Mark
- MTI Wireless Edge
- Newmar
- Nokia
- Nomadix
- Opgal
- Paessler
- PCTEL
- Pente Networks
- PolyPhaser
- Positron Access Solutions
- Primus Cable
- Proxim Wireless
- Radio Waves Inc
- RADWIN
- Redline Communications
- ROHN Products LLC
- Sabre Industries Inc
- Samsung
- SDGI
- SIAE MICROELETTRONICA
- Siklu by Ceragon
- SOLiD
- Solis Energy
- SPINNER Group
- Superior Essex
- Tarana Wireless
- Teltonika Networks
- TP-Link
- Transtector
- Trylon
- Tycon Systems
- Ubiquiti
- viaPhoton
- Videotec
- WaveIP
- Westell
- Winncom Technologies
US...