Connect people. Connect the world.

FIBRAIN is an independent Polish producer of fiber optic and photonics technology. Since 30 years, we have been developing modern infrastructure and connecting people around the globe. Our technological facilities include 4 Fiber Optic Manufacturing Centers, which guarantee the comprehensive product & system portfolio used to build fiber optic networks, in all current technologies.

In addition, we have our own R&D departments and laboratories that give us the possibility to improve our product portfolio in accordance with customer requirements. Therefore, all solutions are adapted to a specific region or environment. What makes our portfolio special is the possibility of comprehensive implementation of projects, starting from the network design through the implementation with the use of FIBRAIN products up to support the whole investment.

FIBRAIN Product Portfolio

HALNy Networks by FIBRAIN

HALNy Networks (High Availability Local Network) by Fibrain, an European vendor established in 2018, focuses on Passive Optical Networks (PON) and active Fiber to the Home (FTTH) terminals. The key objective is to supply modems that are vendor-agnostic, enabling interoperability with a range of OLT vendors which is solely owned by Fibrain. What stands out about the product is the interoperability of ONT which was designed to offer the ability to use any third-party or compatible OLTs with their proprietary technology AdapativeOMCI stack that automatically senses and adapts to the OLT protocol, providing broad out-of-the-box interoperability without needing software upgrades.

HALNy Networks was established by Fibrain to provide a full turnkey solution from passive to active components to building a complete FTTx network.

Featured HALNy Networks Products

HL-4GX3VR - GPON ONT with 4x GLAN ports, Wi-Fi 6 (AX3000), VoIP and CATV ports

HALNy Networks HL-4GX3VR is a GPON ONT that acts as GPON Home Gateway Unit and is designed to provide affordable access to FTTH networks with access to Cable Television. ONT can provide super fast WiFi6 up to 3000Mbps for 5GHz and 2.4GHz. The products use a single fiber to connect individual houses and businesses to the network for broadband services up to gigabit speeds.

All HALNy Networks products within the GPON family comply with current ITU-T standards for gigabit passive optical networks (GPONs). The solution is designed to optimize the deployment and roll-out of the service provider. HL-4GMVR design guarantees multi-interoperability with number of OLT vendors. The ONT/ONU products are tested and have proven interoperability with most major GPON OLT Vendors.

HALNy HL-4GX3VR provides one GPON port SC/APC, four Gigabit Ethernet ports, 2T2R AX3000 WiFi6 interface with 4 external 5dB antennas to maximize coverage, 1 voice/ telephone FXS port and 1 CATV/RF port. This gives the possibility to support full triple-play services for high speed Internet access, CableTV and Telephone.

HL-4BX3V-F - GPON ONT with 1x 2.5GLAN, 3x GLAN ports, Wi-Fi 6 (AX3000) and 1x POTS port

HL-4BX3V-F is a Premium GPON ONT that acts as GPON Home Gateway Unit and is designed to provide affordable access to FTTH networks. The products use a single fiber to connect individual houses and businesses to the network for broadband services up to gigabit speeds.

All products within the GPON family comply with current ITU-T standards for gigabit passive optical networks (GPONs). The solution is designed to optimize the deployment and roll-out of the service provider. HL-4BX3V-F design guarantees multi-interoperability with number of OLT vendors. The ONT/ONU products are tested and have proven interoperability with most major GPON OLT Vendors.

HALNy HL-4BX3V-F provides one GPON port, one 2.5Gigabit Ethernet port, three Gigabit Ethernet ports, WIFI 6 3000AX (2.4GHz and 5GHz) Wireless interface with internal antennas and one Voice FXS ports. This gives possibility to support full triple play services for high speed Internet access, IPTV and voice.

HLX-TGV - XGS-PON ONT with 1x 10GLAN, 1x GLAN and 2x VoIP RJ11 ports

HLX-TGV is XGS-PON ONT that acts as XGS-PON Home Gateway Unit and is designed to provide affordable access to FTTH networks. The products use a single fiber to connect individual houses and businesses to the network for broadband services up to 10-gigabit speeds.

All products within the GPON family comply with current ITU-T standards for 10-gigabit passive optical networks (XGS-PONs). The solution is designed to optimize the deployment and roll-out of the service provider. HLX-TGV design offers multi-interoperability with several OLT vendors. The ONT/ONU products are tested and have proven interoperability with most major GPON OLT Vendors.

HALNy HLX-TGV provides one XGS-PON port (SC/APC type), 10-Gigabit and 1-Gigabit Ethernet ports. All units have Layer 3 (HGU / Router / NAT) and Layer 2 support.

View All HALNy Active Devices.

Telecom Duct Cable Installation Into Existing Ducts Last Mile Outdoor (Central-Tube Construction Single Jacket)

EXO-G0 2.0kN up to 24F

Highlights:

• Highly resistant, UV stabilized HDPE outer jacket

• Central tube (PBT) (Ø 3.2mm/0.126") with thixotropic filling compound

• Fiberglass as a strain relief and water-absorbent

• Optical fibres

• Polyester ripcord

Telecom Duct Cable Directly Buried Installation with Copper Wire Last Mile Outdoor (Central-Tube Toneable Construction Single Jacket)

BURRY-DAC-G-CW up 24F 4.0kN

Highlights:

• Highly resistant, UV-stabilized PE outer jacket

• Two FRP rods reinforcement

• 24 AWG detection copper wire

• Fibre-glass yarns as a strain relief and water-absorbent

• Jelly-filled central PBT loose tube with up to 24 optical fibres

• Ripcord for easy sheath removal

Telecom Duct Cable Installation Into Existing Ducts (Multi-Tube Construction Single Jacket)

BDC-CI up to 432F 4.0kN

Highlights:

• Highly resistant, UV-stabilized HDPE outer jacket

• Fibre-glass yarns as a strain relief and rodent protection

• SZ stranded cable core

• FRP central rod

• Jelly-filled, PBT loose tubes (Ø 2.0mm/0.0787inch) with optical fibres

• Fillers (if applicable)

• Dry cable core - water-blocking tape and/or yarns

• Ripcord - two pieces on opposite sides

Telecom Duct Cable Installation Into Existing Ducts/Directly Buried (Multi-Tube Construction Double Jacket)

DDC-CI up to 432F 4.0kN

Highlights:

• FRP strength and anti-buckling element

• Gelly filled, PBT loose tubes (Ø 2.0mm0.787inch) with optical fibres

• Dry yarns and tape to prevent moisture into the cable

• Glass yarns as a tensile strength element and rodent protection

• Double UV stabilized PE jacket

• Outer jacket options: LSOH, PA etc.

Telecom Duct Cable Installation Into Existing Ducts (Soft-Tube Construction Single Jacket)

MDC-FM up to 288F 3.1kN

Highlights:

• Highly resistant, UV-stabilized HDPE outer jacket

• ESM™ - Gelly-filled Easy Section Modules with 12 fibres each (Ø 1.35mm/0.0531")

• Anti-kink modules

• Dry cable core - water-blocking yarns and/or tape

• FRP rods embedded into the outer sheath

• Polyester ripcord, two pieces on opposite sides

Telecom Aerial Cable Last Mile Connection (Flat Construction Single Jacket)

AERO-DF03 up to 24F 1.8kN

Highlights:

• Highly resistant, UV-stabilized HDPE outer jacket

• Two FRP rods

• Dry cable core - water-blocking yarns

• Gelly-filled central tube (PBT) with up to 24 optical fibres

• Ripcord for easy sheath removal

Telecom Aerial Cable (Multi-Tube Construction Single Jacket)

AERO-AS03 up to 288F 2.0kN

Highlights:

• Highly resistant, UV-stabilized HDPE outer jacket

• Aramid yarns reinforcement

• SZ stranded cable core

• FRP central rod

• Dry cable core - water-blocking tape and/or yarns

• Ripcord - two pieces on opposite sides

• Gelly-filled, PBT loose tubes (Ø 2.0mm/0.079inch) with optical fibres

Telecom Aerial/Duct Cable (Soft-Tube Construction Single Jacket)

MAR-FM ESM up to 288F 3.0kN

Highlights:

• ESM™ - Easy Section Module with 12 fibres each (Ø1.3mm/0.051")

• Dry design, no filling compound inside ESM™

• Water blocking aramid yarns as a strain relief

• Water swellable elements

• FRP rods as strength and anti-buckling elements

• UV resistant black HDPE jacket

• Polyester ripcord, two pieces on opposite sides

Telecom Armoured (Corrugated Steel Tape) Directly Buried/Duct Cable (Central-Tube Construction Single Jacket)

SSC-T30U up to 24F 1.5kN

Highlights:

• Highly resistant, UV-stabilized HDPE outer jacket

• Corrugated steel tape armouring

• Water blocking aramid yarns as a strain relief

• Water tightness yarns to prevent moisture into the cable

• Central loose tube (Ø 3.0mm/0.118inch) with filing compound and optical fibres

Telecom Armoured (Corrugated Steel Tape) Directly Buried/Duct Cable (Multi-Tube Construction Single Jacket)

SSC-CI up to 288F 2.7kN

Highlights:

• Highly resistant, UV-stabilized HDPE outer jacket

• Corrugated steel tape armouring

• Water-blocking tape

• Fibre-glass yarns as a strain relief and water-absorbent

• Gelly-filled, PBT loose tubes (Ø 2.0mm/0.079inch) with optical fibres

• Ripcord - two pieces on opposite sides

Telecom Armoured (Corrugated Steel Tape) Directly Buried/Duct Cable (Multi-Tube Construction Double Jacket)

DSC-CI up to 144F 4.0kN

Highlights:

• FRP strength and anti-buckling element

• Dry yarns and tape to prevent moisture into the cable

• Loose tube PBT (Ø 2.0mm/0.079") with filing compound

• Fibreglass yarns as strain relief

• Corrugated steel tape armouring

• Double UV-stabilized PE sheath

Telecom Microcables Air-Blown Last Mile Connection (Central-Tube Construction Single Jacket)

MK-DXS up to 12F 1.0kN

Highlights:

• UV-stabilized polyolefin jacket with low coefficient of friction

• Aramid yarns as a strain relief

• Gelly-filled central tube up 24 optical fibres

• Smallest outer diameter for blowing into ducts

• Handheld Fiber Blowing Cable

FTTH Last Mile Air Blown Drop Cable (Air-Reel)

MK-AX up 12F

Highlights:

• UV-stabilized polyolefin jacket with low coefficient of friction

• Water-tight central tube with optical fibres

• Smallest outer diameter for blowing into 0.138" ducts

• Central tube (PBT) with up to 12 optical fibres

• Mechanical fibres fillers can be used

Are you interested in learning more about this product? Please fill out your contact info and we will get back to you right away with more details.

* Name:
* Company:
* City:
* State/Province:
Zip/Postal Code:
* Country:
* Email:
* Phone:
* VAR/WISP/End-User/Other:
Questions/Comments:
Please enter text from the image at right: