| Proxim Tsunami GX 32 24 or 32Mbps, 5.8GHz |
| Proxim’s Tsunami™.GX is a full-duplex point-to-point wireless Ethernet bridge with an innovative split-box design. This latest generation of high-capacity wireless bridges is designed to reduce the expense of extending IP networks and to simplify installation. Secure wireless technology significantly reduces total cost of ownership and speeds deployment, while a split-box design adds installation flexibility. The Tsunami.GX also provides best-in-class system performance with native IP interfaces by eliminating the overhead associated with T1/E1-to-Ethernet connections.
Main features:
| Frequency range |
5725-5850 MHz |
| Technology |
DSSS, QPSK |
| Radio Access Method |
FDD |
| Modulation type |
DSSS, QPSK |
| Channel bandwidth |
9 MHz @ 6 dB, 13.5 MHz @ 6 dB |
| Payload throughtput (maximum) |
32 Mbps aggregate (3-channel), 24 Mbps aggregate (2-channel) |
| Modulated Burst Data Rate |
24Mbps or 32Mbps |
| Receiver s ensitivity (maximum) |
-86dBm |
| Device architecture |
Split-box design (ODU&IDU) |
| Number of channels (FCC) |
2 or 3 |
| A ntenna |
External |
| Range with integrated antenna |
N/A |
| Range with external antenna (maximum) |
42-44, mi |
| Polarization |
Depends on antenna type |
| Output Power |
23.5dBm |
| Security |
12-character hexadecimal Link ID code (1216, 281 trillion combinations) |
| Data Communication |
- |
| Standard Compliance |
IEEE 802.3 CSMA/CD |
| VLAN support |
Yes, 802.1q |
| VPN pass through |
NO |
| Layer-2 Traffic Prioritization (QoS) |
NO |
| Layer-3 Traffic Prioritization (QoS) |
NO |
| DHCP server option |
NO |
| Routing, NAT option |
NO |
| Bandwidth control |
NO |
| GPS synchronization (self interference avoidance) |
NO |
| Configuration and Management |
- |
| Local & Remote Management |
HTTP Web Interface, SNMP, Telnet, Serial Craft Terminal (CLI) |
| Remote Management Access, SNMP support |
Yes |
| Interfaces |
- |
| IF (intermediate frequency) |
TNC female |
| Cable type |
Coax, N male connector |
| IF Frequency |
745 – 750 MHz, 140 MHz (+/- 2 MHz) |
| IF cable Impedance |
50 ohms |
| Maximum: IF cable attenuation / cable length |
LMR-240 or equivalent for cable lengths <330 feet (or 100 meters) LMR-400 or equivalent for cable lengths up to 600 feet (or 200 meters) LMR-600 or equivalent for cable lengths up to 1000 feet (or 300 meters) |
| Antenna connector |
Type-N female |
| Ethernet |
RG45, 10/100BaseTx |
| Configuration Port |
DB-9 DCE (female, 9 pin D sub) RS-232 (8 bit data, No Parity, 1 Stop Bit) |
| Auxiliary Data Port |
RJ-45 DCE |
| Alarms Port |
DB-9 (female, 9 pin D sub) |
| Network Management System |
RJ-45 (modular jack, unkeyed) 2 each, 10/100 Base-Tx |
| VF (Orderwire Bridge) |
RJ-45 jack (4-wire); bridged to Orderwire RJ-11 |
| Orderwire (for DTMF Phone) |
2-wire, 4-pin mod jack RJ-11 |
| E1/T1 interface |
DB-9 (female, 9 pin D sub) |
| Physical Specifications |
- |
| Power |
±48 VDC or ±24 VDC IDU: < 30 watts; RFU: <40 watts 240 watts; 50/60 Hz, 110/220 VAC; UL rated Output 20-60 VDC 0.8A DC voltage over coax cable |
| Enveromental requirements |
RF unit -30° to +55° C, 100%, all weather IDU 0° to +50° C, 95% max, non-condensing | |