Axxcelera AB-Extender is a fixed broadband wireless (5GHz) system providing a high speed point-to-point (PTP) channel for Internet, VPN, or other data applications via either ATM or Ethernet interface. Each radio link utilizes two Axxcelera AB-Extender units (a Master and a Slave) each of which includes: An environmentally sealed unit with integrated antenna, transceiver, modem, and control. An internal wall junction box - with RJ45 socket to provide Ethernet or ATM25 connection - connected to the transceiver via an external data cable A 48 VDC power transformer. Range 11.4km (~7miles) QPSK; 16km (~10 miles) QPSK; or 24km (~15miles) QPSK.

Main features:

Frequency range	5150 - 5350 and 5725-5850 MHz
Technology	Narrow band
Radio Access Method	TDD (Time Division Duplex)
Modulation type	QPSK/BPSK
Channel bandwidth	15 MHz
Payload throughput (maximum)	13.7 Mbps (up to 9.5 one way, manually adjustable)
Modulated Burst Data Rate	25Mbps
Receiver sensitivity (maximum)	-81.6dBm
Device architecture	Split-box design (ODU&IDU)
Number of channels (FCC)	16 (10 non-overlapping)
Antenna	Integrated, 23dBi, 10є azimuth x 10є elevation
Range with integrated antenna	15, mi
Range with external antenna (maximum)	N/A
Polarization	Vertical, horizontal
Output Power	16 dBm
Security	proprietary
Data Communication
Standard Compliance	IEEE 802.3 CSMA/CD
VLAN support	Transparent
VPN pass through	YES
Layer-2 Traffic Prioritization (QoS)	ATM technology
Layer-3 Traffic Prioritization (QoS)	ATM technology
DHCP server option	YES
Routing, NAT option	IP routing , ATM switching , NO NAT
Bandwidth control	YES
GPS synchronization (self interference avoidance)	NO
Configuration and Management
Local & Remote Management	HTTP management application, SNMP, Telnet Command Line Interface (CLI)
Remote Management Access, SNMP support	from wired LAN, wireless (only slave unit, via master unit)
Interfaces	.
IF (intermediate frequency)	N/A
Cable type	CAT5 (shielded, outdoor)
IF Frequency	N/A
IF cable Impedance	N/A
Maximum: IF cable attenuation / cable length	330, ft
Antenna connector	N/A
Ethernet	RG45, 10BaseT, optional 10/100BaseT
E1/T1 interface	Optional
Physical specifications
Power	100/240 VAC; 50/60 Hz Output 38-72 VDC 0.8A Propitiatory Power over Ethernet
Environmental requirements	-40°– 50°C, max 100% humidity (condensing)

NOTE: For proper equipment operation line of sight and Fresnel Zone Clearance is required