Motorola Canopy Wireless 5.2 GHz Single products and Spares

Reduce Costs of System Installation and Operation Service providers need to offer superior service to their customers at the lowest cost. The Cluster Management Module micro (CMMmicro) allows network operators to reduce the time and labor cost of system installation and  maintenance in partial Canopy clusters.

Antenna GPS cable (100 ft, LMR-200 type with N-male to BNC-Male Connectors) sold separately.

The Motorola Canopy 5.2 GHz Access Point Module (AP) Module operates with a raw data rate of 10 Mbps and has a range of approximately ten miles (5.2 GHz SM with reflector). Each AP requires a 24-volt power Configuration Guide source and uses a single 10/100 BaseT Half/Full duplex connection to interface into the CMM or appropriate network connection.

Motorola Canopy Wireless SM is the subscriber termination unit or the Customer Premise Equipment (CPE). It consists of a single module that operates with an integrated 60-degree antenna. Each SM can communicate to a single AP Module at any given time. SM synchronization and control is accomplished via the received AP signal. SMs are typically located outdoor and Line of Sight (LOS) from the APs. Once the SM is initialized, it scans the Radio Frequency (RF) channels and automatically registers with the appropriate AP.

The Motorola Canopy 5.2 GHz Access Point Module (AP) Module operates with a raw data rate of 10 Mbps and has a range of approximately ten miles (5.2 GHz SM with reflector). Each AP requires a 24-volt power Configuration Guide source and uses a single 10/100 BaseT Half/Full duplex connection to interface into the CMM or appropriate network connection.