 |
Cisco Catalyst 6500 Series Power Supplies
The 8700 Watt (W) enhanced AC power supply for Cisco® Catalyst® 6500 Series Switches is a triple AC input power supply with remote restart capability. The 8700W enhanced AC power supply is designed for the 6-, 9-, and 13-slot Cisco Catalyst 6500 Series Switch chassis. A Cisco Catalyst 6500 Series Switch configured with the 8700W enhanced AC power supply will support up to 420 IEEE 802.3af Class 3 (15.4W) Power over Ethernet (PoE) devices with full redundancy in a single chassis, providing superior PoE scalability. A Cisco Catalyst 6500 Series Switch along with the 8700W enhanced AC power supply is PoE plus ready with ability to support up to 1750W of power per slot.
The 8700W enhanced AC power supply provides the ability to remotely power cycle or shut down Cisco Catalyst 6500 Series Switches for maintenance using Normally Open (NO) or Normally Closed (NC) built-in external relay contacts using a front-panel terminal block interface. The power supply relay contacts can be controlled through any appropriate third-party relay controller.
The 6000-watt (W) power supply for the Cisco® Catalyst® 6500 Series chassis is a dual AC input power supply. When both inputs are at high line (220 VAC nominal voltage) then the output is 6000W. When both inputs are active but at least one is operating at low line (110 VAC nominal voltage), or a single input is active and running from a high line (220 VAC nominal voltage) source, the unit is capable of providing 2900W output power. (The power supply will not power up with 110V single input.)
All Cisco Catalyst 6500 Series chassis hold up to two load-sharing, fault-tolerant, hot-swappable power supplies. Only one supply is required to operate a fully loaded chassis. If a second supply is installed, it operates in a load-sharing capacity. The power supplies are hot-swappable-a failed power supply can be removed without powering off the system.
|