Grounding Wire Length: 36 in (915 mm)
Description
Hoisting grips are designed for hoisting cable or waveguide safely up a tower so that mechanical connection to an antenna can be made. The grip is split and must be laced together on the cable or waveguide. When the cable or waveguide is in position and fastened to the tower members, the hoist line can be removed. The hoisting grip may then be either attached to the tower as additional support for the cable or waveguide or removed. Place the hoisting grip at the proper location on the cable or waveguide ( look at PDF ) Allow a sufficient length of cable or waveguide leader between the connector and the grip to reach the antenna input
Threaded Rod Support Kit. Stainless steel. Use to mount hangers away from supporting structure, under waveguide bridge, inside equipment room and to restrain waveguide bends. Includes 3/8 inch diameter threaded rod, nuts and washers. Attach to ceiling using included ceiling mounting bracket. Attach to angle tower members with 31768A angle adapters. Attach to round tower members with 30848 series tower standoffs.
Product Information Ordering Information PDF Datasheets