- // Licensed Wireless Point to Point Systems
- // Exalt Communications
- // 6 GHz
- // 7 GHz
- // FCC
- // Outdoor
- // Up to 800 Mbps
- // PtP Radio Module
ExploreAir rc6150 LR 6GHz Upper and 7GHz Lower all-outdoor Gigabit licensed system, PoE+SFP+DC, XPIC ready, 100Mbps expandable to 450Mbps (60MHz/512QAM), 7L Band 2 Low TR 150 MHz (Band edges: 6900-6925MHz)
ExploreAir® LR All-Outdoor Licensed
* Highest system gain, longest range, smallest antennas, lowest cost per Mbps-mile
* Highest sub-60 GHz capacity in a single carrier: 740 Mbps full-dupex @ 512QAM
* XPIC-ready for 1 Gbps+ in a single channel
* Single-unit sparing: industry's lowest TCO
* Fiber/SFP interface with PoE or Coax DC
ExploreAir LR (Long Range) all-outdoor radios are ultra-high capacity, ultra-high system gain zero footprint microwave systems operating in the 6 - 43 GHz bands. Designed to significantly reduce required antenna diameter and featuring the industry's only field-replaceable diplexers, ExploreAir LR systems offer dramatic TCO savings over competitive alternatives. With the industry's only 80 MHz channel and XPIC readiness, ExploreAir LR systems can deliver up to 1500 Mbps full-duplex Layer 1 uncompressed throughput in a single channel, delivering the industry's lowest cost per Mbps-mile. ExploreAir LR provides a true wire speed alternative to fiber for high capacity ring and aggregation applications in 3G+ and 4G/LTE service provider networks as well as high speed campus connectivity and safety and security applications in enterprise and government networks. Additional features and benefits include:
Layer 1 capacity aggregation. ExploreAir LR features the industry's most sophisticated link aggregation technology, automatically load balancing traffic across separate streams running at any channel size, modulation or data rate.
Link performance optimization. For any given channel and modulation setting, users can choose from three settings: maximum system gain, maximum throughput or balanced performance, allowing users to minimize antenna size or increase link availability, to maximize traffic-carrying capacity or to establish a balance between system gain, throughput and latency.
Errorless and jitterless adaptive modulation. With a programmable adaptive modulation range of 512QAM to QPSK, ExploreAir LR can deliver up to wire speed capacity at even greater ranges at high availability levels, then temporarily reduce throughput in the event of a fade while still ensuring the delivery of high priority traffic based on QoS/CoS.
Data networking. ExploreAir LR systems include an integrated hardened Layer 2 switch along with two GbE data ports (1000BaseX SFP, 10/100/1000BaseT), allowing ExploreAir LR to support Ethernet backhaul requirements and features such as 802.1p (QoS), 802.1q (VLAN tagging) and Ethernet rate limiting.
Flexible remote management and security. ExploreAir LR systems include a full set of remote management tools such as secure Telnet/ Command Line Interface (CLI), RS232, HTTP, HTTPS and SNMP v1, v2c and v3. In addition, a separate data (PoE) port provides unique out-of-band management functionality allowing both endpoints of a link to be managed independently. ExploreAir supports hardware-based, FIPS 197-compliant AES 128- and 256-bit payload encryption.
Interface flexibility. ExploreAir LR supports both copper and fiber Gigabit Ethernet interfaces for the ultimate in deployment flexibility. The copper GbE port support PoE, allowing for the use of low cost Cat5 cable while the fiber SFP port, in conjunction with DC power, allows for electromagnetic interference-free operation on even the tallest tower with a high degree of lightning immunity.