|
The Tsunami.GX 90 is a DS-3 capacity, full-duplex point-to-point wireless Ethernet bridge designed for Enterprise IP and PBX extension and for Internet Service Provider data backhaul.
Note. Manufactory Shipping Container includes: Tsunami.GX 90 IDU (Indoor Unit); 5.8GHz ISM Low Band RF Unit; IDU Indoor Rack Management Kit; ACC-GX-RF-1 RF Unit Indoor; Mounting Kit (includes 12” IDU to RFU TNC-to-TNC cable); Quick Instal Guide; CD-User Documentation
| |
Fast, Cost-Effective Extension of IP Networks
Proxim's Tsunami.GX is a full-duplex point-to-point wireless Ethernet bridge with an innovative split-box design. This latest generation of high-capacity wireless bridges is designed to reduce the expense of extending IP networks and to simplify installation. Secure wireless technology significantly reduces total cost of ownership and speeds deployment, while a split-box design adds installation flexibility. The Tsunami.GX also provides best-in-class system performance with native IP interfaces by eliminating the overhead associated with DS3-to-Ethernet connections.
-
Perfect for data and data/voice network backhaul applications and for replacing, extending or backing up leased lines
-
Indoor-only installation facilitates quick maintenance and easier upgrades
-
Indoor/outdoor installation improves system gain and reduces total cost of ownership
Easily manage and trouble-shoot your wireless network
Tsunami.GX bridges offer sophisticated, preventative management tools to simplify network maintenance and eliminate downtime. Advanced diagnostic tools identify and isolate potential issues before they impact the network.
- Standards-based SNMP management and web-based GUI simplifies remote management and integrates easily into existing software platforms
- Built-in spectrum analyzer and an alarm log facilitate RF planning and post-deployment tuning
A wireless alternative to a wired network yields quality as well as flexibility. Proxim's Tsunami bridges offer the highest security and reliability available in networking today.
- Over 99.999% reliable RF transmission
- Meets or exceeds wired network security
The Cost of Ethernet at the Speed of DS-3
Backed by more than 20 years of wireless design innovation, Proxim's Tsunami wireless bridge family easily and affordably enables network extension, redundancy and backhaul. Tsunami wireless bridges eliminate fiber installation costs and leased line fees to bring you the capacity of DS-3 with the TCO of Ethernet.
- High capacity for bandwidth-intensive applications such as PBX extension, data backhaul and critical link redundancy
- No expensive recurring leased line costs
- Superior system gain ensures consistent, high quality network operation
Deploy in daysa
Because Tsunami bridges operate in license-exempt ISM frequency bands, they can be deployed quickly - eliminating the long lead times associated with leasing lines or trenching new fiberoptic cable. This is especially useful in network redundancy and contingency planning.
- Rapid device deployment and flexible re-deployment
- ISPs maintain business continuity, even in severe conditions
- Enterprises minimize costly business application downtime
Reliable and Secure
- Proprietary encryption methods ensure secure data transmission
Applications:
- Enterprise LAN and PBX extension
- WAN connection redundancy
- ISP remote POP
- ISP direct customer connections using point-to-point
- Multipoint backhaul at DS-3 performance
- Extension of an existing fiber network
| Frequency |
Digital Capacity |
Channel Pairs |
FCC Emission Designator |
Treshold (BER=1X10-6) |
Output Power |
System Gain |
Distance (Miles/KM) |
| 5725-5850 MHz |
98 Mbps**** |
1 |
28M1G7D |
≤-79 dBm |
≥+23 dBm* |
≥102 dB, 106 dB typ. |
0 to >32/51*** |
| System |
| Configuration |
Split-box: IDU, RF Unit |
| Modulation |
DSSS; QPSK |
| Frequency Stability |
±10 ppm |
| RF Attenuation Range* |
≥20 dB |
| Maximum Receive Signal |
-20 dBm error free; 0 dBm no damage |
| Error Floor |
<10-11 |
| Latency (T1)**, one-way |
325 µsec ±10% |
| Error Correction |
Reed-Solomon |
| Security |
12 character Link ID (48 bits) |
| Regulatory Compliance |
FCC Part 15.247; IC RS210 |
| FCC ID |
HZB-US5358-GX1 |
| Industry Canada ID |
1856A-U5358GX1 |
|
Digital Interfaces |
| Main Data Channel**** |
96 Mbps aggregate, 48 Mbps full duplex |
| 10/100 Base T |
RJ-45 modular jack, Auto-sense MDI/MDI-X |
| 10/100 Base FX |
SC-Type, multi-mode Fiber |
| Compliance |
IEEE 802.3 |
| Wayside Data Channels |
| T1 |
DSX-1 (2 each), RJ-48C modular jack |
|
Auxiliary Interfaces |
| Orderwire (DTMF) |
RJ-11, 100 addresses |
| VF |
8 pin modular jack, 4-wire, 0dBm @ 600 ohm, balanced |
| Aux Data (serial) |
8 pin modular jack, EIA-561, ≤19.2kbps, selectable, DCE |
|
FAULT AND CONFIGURATION MANAGEMENT |
| Network Management |
SNMP v2c (MIB II, Proxim
enterprise MIBs), embedded
HTML server, Telnet, VT-100
terminal |
| Far End Management |
Via NMS (embedded router,
gateway address, subnet
mask), front panel display |
| Interfaces |
| NMS 1 |
10/100BaseT, RJ-45, auto-sense |
| NMS 2 |
10/100BaseT, RJ-45, auto-sense |
| Configuration (serial) |
EIA-574, 9600bps, 9-pin Sub-D, DTE |
| External Alarm Interface |
| Connector |
9-pin Sub-D female |
| Outputs |
2 Form C Relays (Major, Minor) |
| Inputs |
2 TTL with internal pull-ups |
| Power/Environment |
| Input Voltage Range |
-20 to -60 Vdc or +20 to +60 Vdc |
| Power Consumption |
<70 Watts |
| Power Connector |
3-pin terminal block |
| Operating Temperature |
| IDU |
0°C to +50°C |
| RF Unit |
-30°C to +55°C |
| Humidity |
| IDU |
95%, non-condensing |
| RF Unit |
100%, condensing |
| Altitude |
up to 15,000 ft/5000 m |
| Wind Loading (RF unit) |
up to 110 mph/96 kts |
| MTBF IDU |
>100,000 Hours |
| MTBF RF Unit |
>100,000 Hours |
|
Physical Dimensions |
|
IDU |
RF Unit |
| Size (in/cm) |
|
|
Size (in/cm) 17.2 X 10.9 X 1.72/43.6 X 27.6 X 4.4 |
14.1 X 10.9 X 1.72/35.8 X 27.6 X 4.4 |
| Weight (lbs/kg) |
|
|
6.5/2.9 |
12.0/5.4 |
|
Mechanical |
| RF Unit |
|
| Antenna Port (outdoor RF cable not provided) |
Type-N female |
| IDU Port |
TNC female |
| Cable to IDU |
LMR-240 or equiv. <100m; LMR-400 or equiv. <300m |
| Mounting |
| IDU |
EIA rackmount, 19” or 23”, 1RU |
| RF Unit |
EIA rackmount, 19”or 23”, 1RU, or outdoor pole mount bracket (optional) |
|
SELECTABLE FREQUENCY CHANNEL PAIR |
| Channel Plan A |
5745/5830 MHz |
| * Output power is specified at zero attenuation |
| ** Does not include air latency of approximately 5.4 µsec/mile |
| *** RF Unit installed outdoors with 6ft. parabolic antenna, 99.995% one-way availability, average climate/terrain, no multipath reflection. Assumes FCC regulations for EIRP |
| **** No Waysides enabled | |