AB-Full Access II™ consists of a Software Defined Indoor Unit (SDIDU) and Outdoor Unit (ODU). The AB-Full Access II radios are spectrum and data rate scalable, which enables service providers to have greater flexibility in network planning and future growth. AB-Full Access II delivers aggregate rates up to 210 Mbps within the 5.25 - 5.35 GHz, 5.7 - 5.8 GHz U-NII/ISM bands for distances of up to 20 miles. The integrated E1/T1 and Ethernet interfaces allow for any combination of TDM and Ethernet packet data to be combined up to the maximum throughput. |
REASONS TO BUY AB-FULL ACCESS II
AB-Full Access II offers service providers an excellent return on investment. Customers realize a quick return on their investment through the elimination of leased lines. The AB-Full Access II Consecutive Point Architecture supports a ring/consecutive point configuration with a single IDU per site, additionally creating a self-healing redundancy that is more reliable than traditional point-to-point networks. Transmit power is adjusted in discrete increments in response to RF interference. This results in significant cost savings through simplified deployment, and through more efficient network management. Denser deployment strategies are enabled resulting in enhanced revenue growth.
Key Features:
- Aggregate rate over 210 Mbps
- Highest system gain
- Scalable and spectrally efficient
- ISM 5.8 GHz Unlicensed Band
- U-NII 5.3 GHz Unlicensed Band
- Adaptive power control
- 1+1, 2+0 redundancy
- Integrated 2, 8, or 16 E1/T1
Benefits:
- No monthly leased line fees means quick payback
- Easily deployed and activated
- Ring architecture minimizes interruptions
Applications:
- Connect Buildings, Campuses, etc.
- Backhaul/Extend IP Networks, SANs
- Utility Monitoring, Control, Data Network Aggregation
- Enterprise
- Cyber Cafes
Product Operation:
- Wayside Channels T1/E1 Interface DSX-1 Connector RJ-48C
- Alarm Port vTwo Form C relay alarm outputs, 2 TTL outputs
- Voice Service Channel 6 wire, PTT handset
- Data Service Channel 64kbps
Specifications:
|
Radio |
|
Frequency Range |
ISM: 5.725 – 5.850 MHz
U-NII: 5.250-5.350 MHz |
|
Capacity Options |
Primarily Ethernet |
100 Mbps full duplex payload with wayside 2xT1/E1 or 16xT1/E1 payload with up to 40 Mbps wayside |
|
Primarily E1/T1 |
16 with up to 40Mbps full duplex Ethernet wayside depending on model and E1/T1 configuration
Ethernet and E1/T1 capacity also includes additional 1 Mbps full duplex Ethernet capacity for NMS traffic |
|
Modulation |
QPSK, 16-QAM, 32-QAM, 64-QAM |
|
Encryption |
Encryption based upon a 128-bit key is available for select markets and is applicable for all models |
|
FEC |
Trellis Coded Modulation concatenated with Reed-Solomon Coding |
|
Average Output |
Power ISM +5 to +23 dBm RMS, U-NII -18 to +5 dBm RMS |
|
Max EIRP |
ISM: 46 dBm RMS (with integrated antenna); U-NII: +30 dBm RMS (with integrated antenna) |
|
Receive Sensitivity |
-84dBm to -80dBm (E1/T1)
-84dBm to -70dBm (Ethernet)
Receiver sensitivity varies per selected frequency and modulation |
|
Antenna Gain |
23 dBi (integrated antenna) |
|
Regulatory |
FCC Part 15 IC: RSS210 |
|
Antenna Connector |
N-Type Female for optional external antenna |
|
Distance |
20 miles (or greater, depending on antenna) |
|
Power |
48 volts ±10%, <70 watts; Optional 100-240 Volts AC, 47-63 Hz power supply |
|
Physical and Environmental |
|
Temperature |
IDU -5° to 55°C
ODU -30° to 55°C |
|
Relative Humidity |
IDU 0 to 95%, non-condensing
ODU Up to 100% at 45°C |
|
Altitude |
IDU/ODU both 4500 |
|
Size |
IDU 1RU, ETSI compliant (445 x 238.5 x 44.5 mm) rack mount (19 inches, 48.2 cm)
ODU 39.5 x 36.5 x 5.5 cm |
|
Standards Supported |
|
Physical |
Ethernet 100BaseTX
N x E1/T1 Full duplex E1/T1 |
|
Connector |
Ethernet RJ-45
N x E1/T1 2 x RJ-48C, HD60 |
|
Compliance |
Ethernet IEEE 802.3
N x E1/T1 ITU-T |
|
Network Management |
Support SNMP, built-in web browser
Connector RJ-45, 10/100BaseTX | |