|
Covering the 100 kHz to 3.0 GHz frequency band, the MS2711D Handheld Spectrum Analyzer featuring a pre-amplifier(standard), a battery-operated, field-proven design so powerful, yet so small that it fits into your backpack. Its exceptional performance combined with ease-of-use and broad functionality makes it an ideal solution for field environments and applications that require mobility such as site surveys and on-site system test. Configured with an optional built-in transmission measurement that adds scalar analysis capability from 25 MHz to 2.5 GHz. A color display can be ordered as option 3. This display is for indoor use only. | |
|
The MS2711D also features several dedicated one-button measurements that make testing cellular, DCS/PCS and WLAN systems among other wireless systems easier than ever before. Measurements include channel power, adjacent channel power ratio, and occupied bandwidth measurements that can confirm the distortion level or channel power level of an AMPS, TDMA, CDMA or GSM transmitter. Additionally, the MS2711D can conduct a series of spurious measurements when analyzing a wireless base station transmitter, while the field strength mode allows users to measure propagation and coverage, or to pinpoint electromagnetic (EM) leakage in broadcast systems. Measurement of carrier to interference has been added; This measurement is targeted for measurements of 802.11 a, b, and g access points. Other features include trace averaging for more accurate noise measurements; a multilingual user interface with on-screen menus and messaging in 6 different languages; and a 50-ohm interface that is adaptable to 75-ohms, enabling users to conduct measurements of 75-ohm systems without sacrificing measurement accuracy.
The MS2711D includes data analysis software, soft carrying case, rechargeable/field-replaceable battery, AC/DC power supply, and 12.5V automobile cigarette lighter adapter and users guide. Features
- Handheld, battery-operated design
- Frequency Converter Controller Module available (option 6) for use with Anritsu block down converters
- Built in pre-amplifier (standard)
- Lightweight at only 4.9 lbs
- Noise Level < -135 dBm typical
- Quick Zoom-in, Zoom-out display in 1-2-5 sequence
- RBWs: 100 Hz to 1 MHz in 1-3 sequence
- VBWs: 3 Hz to 1 MHz in 1-3 sequence
- Automatic, manual, and dynamic attenuator control
- Amplitude Accuracy +/- 0.5 dB typical
- Dedicated One-button measurements
- Trace Averaging
- Reference Level Offset
- Trace Overlay
- Multilingual User Interface (English, Chinese, French, German, Japanese, Spanish)
- Store up to 15 measurement test set-ups
- Save up to 200 measurement traces
- Alphanumeric labeling of saved measurements
- Automatic time and date stamp of saved data
- Rechargeable/field-replaceable battery
- 6 Markers, limit lines and segmented limit lines
- 50-ohm Interface standard (75-ohm interface capability - instrument internally corrects for adapter loss)
- RS232 Interface
- Built in AM, FM and SSB demodulation
- Transmission Measurement, 25 MHz to 2.5 GHz (option 21)
- Power Meter (option 29)
Applications
Convenient operating procedures, high sensitivity, and excellent repeatability enable the MS2711D to pinpoint the smallest system performance degradation and allow for easy verification of system compliance. Typical applications include:
Transmitter Spectrum Analysis - occupied bandwidth, channel power, adjacent channel power ratio, modulation and antenna gain/isolation measurements
Receive Signal Analysis - location and identification of in-band interference and out-of-band spurious signals; modulation identification, modulation depth, deviation and spectral mask
Signal Strength Mapping - to determine the most suitable location for antennas, base stations and repeaters
Stimulus-response measurements - for component test.
* Note: Photo shown with option 3 color display.
Spectrum Master, Brochure (PDF Format)
User Guide (PDF Format)
Programming Manual (PDF Format) |