Part of Motorola’s globally proven Canopy platform, Canopy Lite SMs are designed to help network operators convert dial-up subscribers to broadband simply, quickly… and profitably.
And, although Canopy Lite SMs offer substantially lower costs, they also offer the same high performance, reliability and interference tolerance for which the Canopy system is renowned.
Integrated into your network with a Canopy Advantage access point (AP), Canopy Lite SMs are scaleable, available in a variety of frequencies and can be software upgraded to add incremental throughput quickly and inexpensively.
Whether you’re an operator in an established or emerging market, Canopy Lite customer premise equipment (CPE) helps you ensure a strong business case for expansion. Canopy Lite SMs’ affordability enables you to move immediately into multi-application business and residential broadband service with a system that easily scales to mass deployment levels as your network grows. Canopy Lite requires a Canopy Advantage AP to be used in the network.
Canopy Lite SMs offer a wide range of valuedriven performance benefits, including:
Low cost. Canopy Lite SMs eliminate the high CPE pricing levels that are today’s major network expansion barrier. Sold in convenient 25-unit packs, each individual Canopy Lite SM has a suggested price of just $200.
Proven reliability. Based on Motorola’s worldtested Canopy technology that has a reliability rate of more than 99.5%, Canopy Lite offers exceptional reliability and proven interference mitigation for enhanced quality and performance.
Scalability. Your investment in Canopy Lite equipment is protected by the inherent scalability delivered by the Canopy system’s GPS synchronization. You can always add new customers without worrying about service degradation or interference problems.
Multiple Frequencies. Initially available at 5.7 GHz, Canopy Lite SMs are planned for the entire range of frequencies supported by the Canopy platform.
Software upgrades. Canopy Lite SMs operate at 512 kbps throughput with 768 kilobits burst and a maximum of 100 kbps full duplex Committed Information Rate (CIR). As your customers’ need for increased speed grows incremental software upgrades (available at 1, 2, 4 or 7 Mbps) via the PrizmEMS™ will enable Canopy Lite to deliver speeds up to 7 Mbps.
Enhanced security. Secure communications are inherent in Canopy Lite SMs, using DES (Data Encryption Standard) encryption covered with multiple levels of security. Authentication is an available option via the Canopy Bandwidth and Authentication Manager (BAM).
Immediate deployment. Unlike many other network expansion options, the Canopy Lite solution can be deployed and delivering service in a matter of hours rather than weeks and months. Don’t wait to find out how lower-cost Canopy Lite SMs can drive your network’s expansion into wireless broadband service with fast deployment and rapid ROI.
Specifications:
|
Canopy Part Number |
BP5260SM-25DD |
|
Description |
25 pack of 5.2 GHz Lite SM |
|
Signaling Rate |
10 Mbps |
|
Typical LOS Range |
2 mi (3.2 km) |
|
Typical Aggregate Useful Throughput |
512 kbps, 768 kbps burst 100 kbps full duplex CIR |
|
Frequency range of band |
U-NII 5250-5350 MHz |
|
Non-overlapping Channels |
3 |
|
Channel Width |
20 MHz |
|
Modulation Type |
High Index 2-level and 4-level Frequency Shift Keying (FSK) optimized for interference rejection |
|
Channel Spacing |
configurable on 2.5 MHz increments |
|
Encryption |
DES capable |
|
Latency |
6 msec with Advantage AP |
|
Carrier to Interference ratio (C/I) |
~3dB @ 10 Mbps, ~10dB @ 20 Mbps at -65dBm |
|
Nominal Receiver Sensitivity (dbm typical) |
-86 dBm |
|
Antenna Gain (dB) |
7 dBi |
|
EIRP (dB) |
30 dBm |
|
Equivalent Isotropic Radiated Power (EIRP) |
1 W |
|
DC Power (typical) |
0.3 A @ 24 VDC= 7.2 W |
|
Mean Time Between Failure (MTBF) |
40 yr |
|
Antenna Beam Width |
3 dB antenna beam width 60 degrees, Azimuth and Elevation |
|
Temperature |
-40° C to +55° C (-40° F to +131° F) |
|
Wind Survival |
190 km/hr (118 miles/hr) |
|
Dimensions |
11.75 in H x 3.4 in W x 3.4 in D (29.9 cm H x 8.6 cm W x 8.6 cm D) |
|
Weight |
.45 kg (1 lb) |
|
Access Method |
Time Division Duplexing/Time Division Multiple Access (TDD/TDMA) |
|
Interface |
10/100 Base T, half/full duplex. Rate auto negotiated (802.3 compliant) |
|
Protocols Used |
IPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP |
|
Network Management |
HTTP, TELNET, FTP, SNMP Version 2c |
|
FCC ID |
ABZ89FC5808 |
|
Industry Canada Certification Number |
109W-5200 |
|
NYCE |
0202CE08128 |