The SM is the subscriber termination unit or the Customer Premise Equipment (CPE). It consists of a single module that operates with an integrated 60-degree antenna. Each SM can communicate to a single AP Module at any given time. SM synchronization and control is accomplished via the received AP signal. SMs are typically located outdoor and Line of Sight (LOS) from the APs. Once the SM is initialized, it scans the Radio Frequency (RF) channels and automatically registers with the appropriate AP. |
|
Package Includes: |
|
P/N |
Description |
Quantity |
|
5200SM |
5 GHz Canopy Subscriber Module with AES |
25 |
|
ACPSSW-02 |
90-230VAC Power Supply-Euro |
Not Included |
|
SMMB1 |
Canopy Universal Mounting Bracket |
Not Included |
Each SM requires a Category 5 cable for its Ethernet connection to the premise IP equipment with DC power supplied to the SM through that same cable. The SM uses a 110 VAC power supply (ACPS110-01 or -02) or the 90V-230V switching power supply (ACPSSW-01) and associated RJ45 connector to power the SM. The Universal Mounting Bracket (SMMB1) is available for mounting the SM to the customer site. One SMMB1 is required for each SM. It is recommended to use a Canopy Ethernet Surge Protector (300SS) mounted at the Ethernet entry point on the outside wall of the premise.
Specifications:
|
Canopy Part Number |
5200SM |
|
Description |
5.2 GHz SM |
|
Market Availability |
North America |
|
Signaling Rate |
10 Mbps, 20 Mbps with Advantage AP |
|
Typical LOS Range |
2 mi (3.2 km) |
|
Typical Aggregate Useful Throughput |
7 Mbps |
|
Frequency range of band |
U-NII 5250-5350 MHz |
|
Non-overlapping Channels |
3 |
|
Channel Width |
20 MHz |
|
Modulation Type |
High Index 2-level and 4-level Frequency Shift Keying (FSK) optimized for interference rejection |
|
Channel Spacing |
configurable on 5 MHz increments |
|
Encryption |
DES capable |
|
Latency |
6 msec with Advantage AP, 15 msec with Canopy AP |
|
Carrier to Interference ratio (C/I) |
~3dB @ 10 Mbps, ~10dB @ 20 Mbps at -65dBm |
|
Nominal Receiver Sensitivity (dbm typical) |
-86 dBm |
|
Antenna Gain (dB) |
7 dBi |
|
EIRP (dB) |
30 dBm |
|
Equivalent Isotropic Radiated Power (EIRP) |
1 W |
|
DC Power (typical) |
0.3 A @ 24 VDC = 7.2 W |
|
Antenna Beam Width |
3 dB antenna beam width 60 degrees, Azimuth and Elevation |
|
Mean Time Between Failure (MTBF) |
40 yr |
|
Temperature |
-40° C to +55° C (-40° F to +131° F) |
|
Wind Survival |
190 km/hr (118 miles/hr) |
|
Dimensions |
11.75 in H x 3.4 in W x 3.4 in D (29.9 cm H x 8.6 cm W x 8.6 cm D) |
|
Weight |
.45 kg (1 lb) |
|
Access Method |
Time Division Duplexing/Time Division Multiple Access (TDD/TDMA) |
|
Interface |
10/100 Base T, half/full duplex. Rate auto negotiated (802.3 compliant) |
|
Protocols Used |
IPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP |
|
Network Management |
HTTP, TELNET, FTP, SNMP Version 2c |
|
FCC ID |
ABZ89FC3789 |
|
Industry Canada Certification Number |
109W-5200 |
|
NYCE |
0202CE08128 | |