BridgeWave GE60X-AES 1.25 Gbps, full-duplex, extended-range link, 60GHz U.S. & CAN. license-free, Adv. Encrypt. S/W high power, 24 inch external antennas, 1000Base-SX (LC), 10/100 Add Drop Port |
BridgeWave's GE60 and GE60X gigabit Ethernet wireless links are the first affordable products to provide highly-available wireless connections at full GigE data rates. These point-to-point links transmit and receive simultaneously at full-rate GigE speeds (1.25Gbps) with very low latency, providing the performance of physical fiber over a highly-secure wireless connection. |
Key Features Of 60GHz Links
Performance:
- License-free operation in the U.S. and Canada
- Highly secure, narrow antenna beamwidths
- Interference-free operation, enabling high-density deployments
- Full rate, full duplex, Gigabit or Fast Ethernet
- AdaptRate™ switching overcomes rain fades
- Low latency for fiber-equivalent performance
- Forward Error Correction yields maximum link range
- Add/Drop Ports
Reliability:
- Rigorous HALT/HASS testing
- Up to 99.999% availability; 28-Year MTBF
Ease-of-Use:
- Connects directly to standard network equipment
- All-outdoor, compact design
- Low voltage power cabling
- Rapid & flexible deployment
- Embedded web and SNMP based network
management agent
Specifications:
|
GE60X Extended-Range Gigabit Ethernet |
|
Data Rate |
1000 Mbps full-duplex |
|
Latency |
< 50 microseconds |
|
Link Budget |
167dB @ 10-12 BER |
|
RF Interface |
58.1GHz/62.9GHz (FDD), digitally modulated (BFSK) with forward error correction (RS 204,188) |
|
1.4GHz bandwidth |
|
Min. link distance: 65ft (20 m) |
|
Antenna |
External 2 ft (62 cm) directional cassegrain |
|
Linear polarized (V/H), 46dBi gain, 0.6° beam |
|
Ethernet Interfaces |
1000Base-SX with LC connectors—up to 270 m 62.5/125мm MMF, or 500 m 50/125мm MMF |
|
10/100Base-TX with RJ-45 connector—up to 100 m Cat 5 cable (two Ethernet surge suppressors required) |
|
Maximum Ethernet frame length: 1632 bytes |
|
Management |
Web-based (HTML) embedded management agent: setup, security, status, statistics, software update |
|
SNMP support: MIB-II and BridgeWave enterprise MIB |
|
Voltmeter test points: Receive Signal Level and Link Quality |
|
Power |
100-240 VAC input / +24 VDC output indoor power supply — 45 watts max. consumption |
|
Max. cable length: 650 ft (200 m) with 12AWG; 400 ft (125 m) with 14AWG (24VDC surge suppressor required) |
|
Mount |
Fine-adjust pole mount: 2.8-4.5 in (7-11 cm) OD |
|
Size |
Radio/antenna unit: 30w * 30h * 12d (cm) |
|
Weight |
Radio: 5.4 kg (11.9 lbs) |
|
Antenna: 8.5 kg (19 lbs) |
|
Mount: 3.0 kg (6.6 lbs) |
|
Environmental |
Operating temperature: -30 to +50 °C (-22 to 122 °F) |
|
Operating altitude: 14, 764 ft maximum (4,500 m) |
|
Wind Loading |
120 lbs. force @ 100 MPH |
|
Regulatory |
Safety: UL Listed, CE Mark, meets FCC 1.1310 general population RF MPE limits |
|
RF Certifications: U.S. FCC Part 15.255; Industry Canada RSS-210 |
|
Install Kit |
Voltmeter test cable, power connectors |
|