BridgeWave Refurbished FE60X link, drop-ship from BridgeWave only, for sale only to BridgeWave Certified VARs, display/demo/spare use only, not for resale, 1 year warranty |
BridgeWave's FE60 and FE60X 100Mbps Ethernet wireless links provide a cost-effective alternative to 5GHz or FSO 100Mbps links, where frequency congestion is present or where high link availability and security are required. FE60 and FE60X links operate at true 100Mbps, full-duplex data rates, and feature very low link latencies and the longest range of any 100Mbps 60GHz link on the market. |
FE60X links feature two-foot, mast mounted antennas with detatchable radio units, allowing the radio to be serviced without removing or realigning the antenna. FE60X links offer up to twice the range of FE60 links, enabling users to reach up to four times as many remote sites from a given location. Due to the larger antenna size, and narrower beamwidth, BridgeWave recommends that these links be professionally installed.
Key Features:
- Full Gigabit Ethernet Performance
1000Base-SX interface. Full duplex, full rate, non-blocking. Latency below 50 microseconds.
- License-Free Performance
60 GHz license-free spectrum (US).
- Virtually Interference-Free Operation
Narrow, point-to-point beams and the oxygen absorption properties of the 60 GHz spectrum provide immunity to interference and allow co-location of multiple links.
- Easy to Install and Maintain
Simple, intuitive installation and visual alignment tool for basic alignment. No maintenance required.
- Highest Quality
Every unit is subjected to state-of-the-art highly accelerated system screening (HASS) to prevent pre-mature field failures.
- Forward Error Correction
Allows error-free operation at one-quarter of the receive signal strength of competing units, providing 20-30% longer link distances.
Specifications:
|
Radio |
|
Operating Frequency (FCC Part 15 Section 255) |
Low transmit: 58.1 GHz |
| High transmit: 62.9 GHz |
|
Data Rate |
100 Mbps full-duplex |
|
Modulation/Coding |
BFSK
Reed-Solomon (204,188) FEC |
|
Frequency Division Duplex (FDD) |
|
Latency |
< 150 microseconds |
|
Link Budget |
173dB @ 10-12 BER |
|
RF Bandwidth |
140 MHz |
|
Antenna |
External 62 cm directional cassegrain, Linear polarized (V/H), 0.6° beamwidth, 46 dBi gain |
|
Ethernet Interface |
|
1000Base-SX multi-mode fiber with LC connectors |
|
Up to 1522-byte 802.1Q VLAN tagged frames |
|
Max. Multimode fiber cable lengths: |
62.5/125 µm 270 meters (max.)
50/125 µm 500 meters (max.) |
|
Electrical |
|
Power |
|
Indoor supply input |
110/220 Vac |
|
Indoor supply output |
+24 Vdc |
|
Power consumption |
45 watts (max.) |
|
Power cable length: |
12AWG: 200 meters
14AWG: 125 meters |
|
Mechanical |
|
Install Kit |
Volt meter cable, power connectors |
|
Size: |
Radio with antenna: 62w * 62h * 50d (cm) |
|
Weight: |
Radio: 5.2 kg (11.5 lbs)
Mount: 3.6 kg (8 lbs)
Antenna: 8.5 kg (19 lbs) |
|
Mount |
Fine-adjust pole mount: 6-11 cm (2.5-4.5 in.) OD |
|
Environmental |
|
Wind Loading |
120 lbs. force @ 100 MPH |
|
Operating temperature |
-30 °C to +50 °C |
|
Altitude |
4,500 meters (max.) | |