\ Wireless Point to Point Ethernet Backhaul Bridges \ Over 155Mbps Wireless Gigabit Point to Point Ethernet Bridges \ 60, 80 GHz Wireless Gigabit Ethernet Point to Point Bridges
Email This Page to a Friend
BridgeWave FE60X-LX 100 Mbps, full-duplex, extended-range link, 60GHz U.S. & CAN. license-free, high power, 24 inch external antennas, 1000Base-LX (LC), single mode fiber interface
Winncom PN # FE60X-LX Manufact PN # FE60X-LX List Price: Login/Call Login and Stay on this page
BridgeWave's FE60 and FE60X 100Mbps Ethernet wireless links provide a cost-effective alternative to 5GHz or FSO 100Mbps links, where frequency congestion is present or where high link availability and security are required. FE60 and FE60X links operate at true 100Mbps, full-duplex data rates, and feature very low link latencies and the longest range of any 100Mbps 60GHz link on the market.
FE60X links feature two-foot, mast mounted antennas with detatchable radio units, allowing the radio to be serviced without removing or realigning the antenna. FE60X links offer up to twice the range of FE60 links, enabling users to reach up to four times as many remote sites from a given location. Due to the larger antenna size, and narrower beamwidth, BridgeWave recommends that these links be professionally installed. Key Features: Full Gigabit Ethernet Performance 1000Base-SX interface. Full duplex, full rate, non-blocking. Latency below 50 microseconds. License-Free Performance 60 GHz license-free spectrum (US). Virtually Interference-Free Operation Narrow, point-to-point beams and the oxygen absorption properties of the 60 GHz spectrum provide immunity to interference and allow co-location of multiple links. Easy to Install and Maintain Simple, intuitive installation and visual alignment tool for basic alignment. No maintenance required. Highest Quality Every unit is subjected to state-of-the-art highly accelerated system screening (HASS) to prevent pre-mature field failures. Forward Error Correction Allows error-free operation at one-quarter of the receive signal strength of competing units, providing 20-30% longer link distances. Specifications: Radio Operating Frequency (FCC Part 15 Section 255) Low transmit: 58.1 GHz High transmit: 62.9 GHz Data Rate 100 Mbps full-duplex Modulation/Coding BFSK Reed-Solomon (204,188) FEC Frequency Division Duplex (FDD) Latency < 150 microseconds Link Budget 173dB @ 10-12 BER RF Bandwidth 140 MHz Antenna External 62 cm directional cassegrain, Linear polarized (V/H), 0.6° beamwidth, 46 dBi gain Ethernet Interface 1000Base-SX multi-mode fiber with LC connectors Up to 1522-byte 802.1Q VLAN tagged frames Max. Multimode fiber cable lengths: 62.5/125 µm       270 meters (max.) 50/125 µm          500 meters (max.) Electrical Power Indoor supply input 110/220 Vac Indoor supply output +24 Vdc Power consumption 45 watts (max.) Power cable length: 12AWG: 200 meters 14AWG: 125 meters Mechanical Install Kit Volt meter cable, power connectors Size: Radio with antenna: 62w * 62h * 50d (cm) Weight: Radio: 5.2 kg (11.5 lbs) Mount: 3.6 kg (8 lbs) Antenna: 8.5 kg (19 lbs) Mount Fine-adjust pole mount: 6-11 cm (2.5-4.5 in.) OD Environmental Wind Loading 120 lbs. force @ 100 MPH Operating temperature -30 °C to +50 °C Altitude 4,500 meters (max.)