Axxcelera’s ExcelMax Indoor CPE is a low cost, self-installable Point to Multipoint (PMP) CPE designed to operate in the 3.3-3.8 GHz spectrum and supports a Half Duplex FDD (Frequency Division Duplex) or a TDD (Time Division Duplex) architecture. The WiMax-2004 compliant Indoor CPE allows service providers to offer broadband wireless services to customers in Non Line of Site (NLOS) locations. The ExcelMax CPE 3400 supports a strong suite of Quality of Service (QoS) features, including Committed Information Rate (CIR), Peak Information Rate (PIR) and Best Effort services. The CPE supports Call Admission Control (CAC) features, which allows for scalable carrier class VoIP services and the IGMP protocol which supports Video Broadcast services. All CPEs in a service provider network are completely managable remotely by Axxcelera’s carrier-class Network Management System using SNMP protocol. |
REASONS TO BUY EXCELMAX INDOOR CPE
ExcelMax Indoor CPE offers service providers an ability to offer residential broadband wireless services at rates competitive with wireline technologies. The self install nature of the indoor CPE allows Service Providers to sell CPEs from retail outlets since no professional installation mechanisms are needs for the indoor CPE. Its multi-service capabilities and QoS features allow service providers to offer reliable, high quality, revenue generating applications (data, VoIP and video broadcast) to different customer types (residential, SoHo, MDU and SME). The mature CPE architecture has been deployed in large data, voice and video networks and ensures reliable operations in the field. Axxcelera provides a suite of management, installation, provisioning and configuration tools which make the installation and maintenance of the CPE extremely simple. Key Features:
- WiMax-2004 Compliant - NLOS operation
- Enhanced NLOS Features: Uplink Subchannelization; Space Time Coding
- Self Install, Self Configure Indoor CPE
- Half-Duplex FDD and TDD support
- Supports data, voice and video services
- Comprehensive Quality of Service (CIR, PIR, Priority) and VLAN support
Benefits:
- Low cost CPE allows mass residential rollout
- Self Install feature avoids cost of professional installation
- Robust, field proven platform
Specifications:
|
Radio Characteristics |
|
Frequency Band |
3.3-3.8 GHz |
|
Air Interface Standard |
802.16-2004 |
|
Architecture |
Point to Multipoint (PMP) |
|
Duplex Scheme |
Half Duplex FDD/TDD |
|
FDD Duplex Spacing |
100 MHz typical |
|
RF Channel Sizes |
7 MHz, 3.5 MHz and 1.75 MHz |
|
Modulation Types |
Dynamic Adaptive: 64QAM, 16QAM, QPSK, BPSK |
|
Coding Rates |
1/2, 2/3 and 3/4 |
|
Net Throughput |
18 Mbps (7 MHz channel size ) |
|
Transmit Power |
+18dBm |
|
Receive Sensitivity |
-100dBm |
|
Antenna Beam Width |
Omni |
|
Antenna Gain |
6 dBi |
|
Environmental Characteristics |
|
Operating Temperature |
-5°C to +40°C |
|
Operating Humidity |
10-90% non-condensing |
|
Power supply |
120-240 VAC 50-60 Hz or -40 to -60VDC |
|
Power consumption |
15 Watts nominal |
|
Dimensions |
4” x 6” x 2” |
|
Weight |
5 lbs |
|
Standards Supported |
|
Air Interface |
IEEE 802.16-2004(D5) |
|
NLOS Enhanced Features |
Uplink Sub-channelization; Space Time Coding |
|
Prioritization |
802.1p (8 different prioritization levels) |
|
VLAN |
IEEE 802.1Q |
|
VoIP |
SIP, MGCP, H323, Call Admission Controller |
|
Video Broadcast |
IGMP |
|
Security/Encryption |
BS and SS authentication via x.509 certificates, CBD-Mode 56-bit DES, AES-CCM mode |
|
Interfaces |
10/100 Base T Full Duplex; External (fiber, ATM and E1/T1) |
|
Network Management |
SNMP |
|
International Standards |
Wireless performance ETSI EN 301 753 and EN 301 021; Antenna performance ETSI EN 302 085 CE Compliance via European R&TTE Directive Annex IV Self-Declaratory process |
|
EMC |
Emissions: EN55022 (CISPR 22) to Class B; EN61000-3-2 and EN61000-3-3 |
|
Safety |
Susceptibility: EN300 489 (includes EN61000 series); EN60950 (IEC 950): Including amendments 1-4ts 1-4 |
|