\ Wireless WAN/LAN Multipoint. 900 MHz, 2.4 GHz, 4.9 GHz, 5 GHz and 3.5 GHz WiMAX Products \ 2.4 GHz Unlicensed Frequency Band Wireless Point-to-MultiPoint (PtMP) Products
Email This Page to a Friend
Terabeam Wireless TeraStar™ EtherAnt Turbo-LR 802.11b based TurboCell Enhanced Point to MultiPoint Client Premises Equipment (CPE)
Winncom PN # ETHERANTT-LR Manufact PN # 603-900050-301 List Price: Login/Call Login and Stay on this page
The TurboCell® Integrated EtherAnt Turbo is a powerful, FCC certified unit that offers the lowest entry price for a point-to-multipoint (P-MP) outdoor wireless equipment. It is designed for the residential market as a cost-optimized solution, and is the client side of a wireless P-MP network. The EtherAnt Turbo supports 1 to 5 wired users and features the award-winning industry standard TurboCell® software, a protocol which significantly enhances the performance of outdoor 802.11b systems through the use of adaptive dynamic polling, bandwidth allocation at the client, and packet aggregation. TurboCell® solves the hidden node problem inherent in adding nodes to outdoor networks. This all-in-one unit includes Terabeam's advanced chip set, an embedded 18 dBi antenna, and a 2.4 GHz radio. Because of its outstanding feature set and affordable price, the EtherAnt Turbo provides the best value in the outdoor wireless industry. And it also supports your existing TurboCell® installations, saving you the need to reinvest in costly software.
Key Features Password-based Security Adaptive Dynamic Polling Bandwidth Control/Data Rate Throttling SuperPacket Aggregation Solution for Hidden Node Problem Continuous Signal Quality Monitoring The EtherAnt Turbo features true plug-and-play installation, allowing for rapid and scalable deployments! With the EtherAnt Turbo you don't have to worry about complicated client installations, no more worrying about driver conflicts with various OS, and, best of all, you don't have to open up the customer's computer! Simply plug the EtherAnt Turbo directly into the client computer's Ethernet adapter and you are ready to go. Two versions of the EtherAnt Turbo are available: the standard series EtherAnt Turbo with an integral 18 dBi gain flat panel antenna, and the EtherAnt Turbo-LR with the addition of an integrated bi-directional fixed amplifier to boost range and improve reception. The WLAN device located in the antenna gets its power from the DC Power Injector which puts DC power onto the Ethernet cable. Also, because the radio is in the antenna, there is no coax cable loss! Up to 300 feet of Ethernet cable between the DC injector and the antenna can be used with no signal loss. Just plug the outdoor Ethernet cable (ordered separately) into the Cat 5 DC Injector, and then into the PC or Router, and you're done! Since it is FCC certified for nonprofessional installation, it is legal for the customer to do self-installation! NOTE: The EtherAnt Turbo can associate only to Base stations that run TurboCell® software. It does not work with 802.11b AP's. EtherAnt Turbo Kit Includes Flat panel antenna with WLAN device built-in Sturdy steel wall/mast tilt-bracket mount Cat 5 DC Power injector 110/220 VAC TO 48 VDC Power Supply CD-ROM with Windows-based software and documentation This series of solutions is backward compatible with: Orinoco COR/ROR/ORC products from Proxim, Lucent or Avaya KB10 products from Karlnet AP-Ant and RG-Ant with TurboCell® load from YDI