The EX-5r IP wireless Ethernet bridges from Exalt are the only tri-band 5GHz, native IP wireless bridges available today. These all-outdoor systems operate in the 5.25-5.35 GHz, 5.4-5.725 GHz, and 5.725-5.850 GHz bands, and deliver up to 200Mbps of sustained user capacity in a software-configurable, carrier class system with high spectral efficiency, SNMPv3/ HTTP/CLI management, and unprecedented spectrum management flexibility. |
The EX-5r IP and EX-5r-c IP feature GPS synchronization (optional ExaltSync GPS kit) for high density collocation and spectrum reuse, providing the highest interference avoidance features for the most challenging RF environments. In addition, the systems support asymmetrical transmission for video surveillance and broadcast applications, as well as strong link security, AES encryption, and VLAN.
Exalt’s breakthrough spectrum-management technology provides up to 54 non-overlapping frequency channels, with 1 MHz fine tuning capability across the three 5GHz bands without restrictive pre-configured channel plans. This results in as many as 415 center frequencies of operation to choose from without new hardware or system re-tuning. As an additional interference countermeasure, the EX-5r IP and EX-5r-c IP provide 8, 16, 32, and 64 MHz channel bandwidths and synchronization to help maximize band usability and throughput for the required distance of the link.
The EX-5r IP and EX-5r-c IP provide excellent system performance and functionality, resulting in the highest value and lowest cost per megabit-mile in its class!
Specifications:
|
System |
|
Frequency Band* |
5250-5350MHz
5470-5725MHz
5725-5850MHz |
|
Tuning Resolution |
1MHz |
|
Output Power (at full power) |
|
|
5725-5850MHz band |
+24dBm, Mode 1
+21dBm, Mode 2 |
|
5470-5725MHz band |
+13dBm |
|
5250-5350MHz band |
+13dBm |
|
Output Power (at min power) |
Full power minus 20 dB |
|
Power Control Step Size |
0.5 dB |
|
Receiver Threshold (guaranteed over temperature @BER=10-6) |
Mode1 |
Mode2 |
|
8 MHz channel |
-86 dBm |
-78 dBm |
|
16 MHz channel |
-83 dBm |
-75 dBm |
|
32 MHz channel |
-80 dBm |
-72 dBm |
|
64MHz channel** |
-77 dBm |
-69 dBm |
|
Receiver Threshold (typical) |
2 dB better than above |
|
Maximum RSL (Mode 1) |
-25 dBm error-free, 0 dBm no damage |
|
Non-overlapping channels |
| |
5.3 GHz |
5.4 GHz |
5.8 GHz |
|
8 MHz channel |
10 |
29 |
15 |
|
16 MHz channel |
5 |
14 |
7 |
|
32 MHz channel |
2 |
7 |
3 |
|
64 MHz channel** |
1 |
3 |
1 |
|
Aggregate User Capacity**** |
Mode1 |
Mode2 |
|
8 MHz channel |
13 Mbps |
27 Mbps |
|
16 MHz channel |
27 Mbps |
55 Mbps |
|
32 MHz channel |
55 Mbps |
110 Mbps** |
|
64 MHz channel |
110 Mbps |
200 Mbps |
|
Throughput Symmetry |
5 Modes
20/80; 80/20
35/65; 65/35
50/50 |
|
Error Floor |
10-12 |
|
Latency (T1) |
1ms, typical |
|
Maximum packet size |
1916 bytes |
|
Link Security |
96-bit proprietary
AES 128/256 encryption |
|
Spectrum Analyzer |
HTTP GUI, CLI/Telnet, SNMPv3 |
|
Management |
Embedded |
|
VLAN |
802.1Q |
|
Regulatory Compliance |
FCC 15.247
FCC 15.407
IC RSS-210 |
|
Physical |
|
Physical Configuration |
Outdoor unit (ODU) |
|
Physical Configuration Dimensions (H x W x D) |
13 x 13 x 4.25 inches (33x 33 x 10.8 cm) |
|
Operating Temperature |
-40 to +65 degrees C
-40 to +149 degrees F |
|
Full Spec Temperature |
-40 to +60 degrees C
-40 to +140 degrees F |
|
Weight |
14 pounds; 6.4 kg |
|
Environmental |
NEMA 4/IP56 |
|
Altitude |
15,000 feet; 4.6 km |
|
Humidity |
100% condensing |
|
Interfaces |
|
Ethernet |
RJ45 (F), auto-MDIX |
|
Interface Speed |
10/100BaseT |
|
Duplex |
Half, Full, Auto |
|
Compliance |
802.3 |
|
Sync (In) |
RJ45 (F) |
|
Signaling |
1pps (GPS) |
|
AC Power Adapter Input |
100-240VAC, 1.5A |
|
AC Power Adapter Output |
48VDC, 1.5A, 72W via Power injector |
|
System Components |
|
Complete link |
Two terminals, each with AC adapter, accessory kit, and mounting kit |
|
Accessory kit |
Power injector, weatherproof connector, PoE cable, RSL antenna alignment cable, weatherproofing tape, and grounding hardware (spare) |
|
AC adapter |
AC adapter (spare) |
|
Mounting kits |
EX-5r IP mounting kit (spare) |
|
GPS sync kit |
GPS antenna and mounting bracket (optional) |
* Not all frequency bands are authorized or available for use in all countries. Consult your Exalt Communications representative for details.
** Firmware option required.
*** Integrated antenna (EX-5r) and external antenna version (EX-5r-c) both have user-selectable polarization switching.
**** The figure listed is the actual aggregate user throughput, maximum, as measured at layer 2. T1 or E1 circuits may be enabled one at a time, as needed, and subtract 3.1Mbps (1.544Mbps full-duplex) or 4.1Mbps (2.048Mbps full-duplex), respectively, from the aggregate user throughput. Some combinations of frame size, link distance, T1/E1 enabling, bandwidth, mode and desired latency will result in reduced maximum aggregate throughput. See your Exalt Communications representative for details. |