\ Wireless Point to Point Ethernet Backhaul Bridges \ Up to 155Mbps Wireless Point to Point Ethernet Bridges \ 4.9-5.8 GHz Wireless Point to Point Ethernet Bridges, Up to 155 Mbps
Email This Page to a Friend
Exalt EX-5i-DS3 5GHz Tri-Band IDU, 0xDS3+4xT1/E1 +10/100BaseT expandable to 1xDS3 + 4-16xT1/E1+ 10/100BaseT, 100Mbps Wireless Backhaul Microwave Radio; (32MHz/Mode2), (5.25-5.35GHz/5.4-5.725GHz/5.725-5.850GHz); Terminal with AC adapters
Winncom PN # E500501 Manufact PN # E500501 List Price: Login/Call Login and Stay on this page
The EX-5i-DS3 from Exalt is the only carrier-class, tri-band 5GHz DS3 system with software expandability for adding up to 16xT1/E1 and 100BaseT. The system provides native TDM and native IP in the 5.25-5.35 GHz, 5.47-5.725 GHz, and 5.725-5.850 GHz bands with over 200Mbps user-throughput capacity, high spectral efficiency, low latency, strong security, transmission resiliency, and unprecedented spectrum management flexibility.
Exalt’s breakthrough technology provides up to 54 non-overlapping frequency channels, or up to 12 with DS3 enabled. The system provides un-paralleled software expandability for a total user capacity of 1xDS3 +16T1/E1+77Mbps Ethernet in a single system! Integrated Monitored Hot Standby (MHS) protection provides added reliability for hard to access locations. And, ExaltSync and ExaltSync GPS provide un-matched internal or external synchronization capability for highi-density collocation and spectrum reuse. TDM capacity may be conveniently expanded in groups of four ports and/or 1xDS3 via software upgrade option. Ethernet capacity may also be expanded independently, providing ultimate flexibility for TDM to IP migration. Together with the Exalt Capacity Expansion kit the EX-5i-DS3 is a perfect complement to 6GHz part 101 links in need of additional DS3, nxT1, or high speed Ethernet. The EX 5i-DS3 from Exalt is an exceptional value, with industry-leading performance, functionality and the lowest cost per megabit-mile in its class. Specifications: System Frequency Band* 5250-5350MHz 5470-5725MHz 5725-5850MHz Tuning Resolution 1 MHz Output Power (at full power), 5725-5850MHz band Mode 1 Mode 2 +24 dBm +21 dBm Output Power (at full power), 5250- 5350MHz band +13dBm Output Power (at full power), 5470-5725MHz band +13dBm Output Power (at min power) Full power minus 20dB Power Control Step Size 0.5 dB Receiver Threshold (guaranteed over temperature @BER=10-6) Mode1 Mode2 8 MHz channel -86 dBm -78 dBm 16 MHz channel -83 dBm -75 dBm 32 MHz channel -80 dBm -72 dBm 64 MHz channel** -77 dBm -69 dBm Receiver Threshold (typical) 2db better Maximum RSL (Mode 1) -25 dBm error-free 0 dBm no damage Non-overlapping channels   5.3 GHz 5.4 GHz 5.8 GHz 8 MHz channel 10 29 15 16 MHz channel 5       14      7 32 MHz channel 2 7 3 64 MHz channel** 1 3 1 Aggregate User Capacity*** Mode1 Mode2 8 MHz channel 13 Mbps 27 Mbps 16 MHz channel 27 Mbps 54 Mbps 32 MHz channel**** 55 Mbps 110 Mbps 64 MHz channel** 110 Mbps 216 Mbps Supported maximum capacities DS3 T1 Ethernet***** 8 MHz channel   Mode1 0 4 1 Mbps 8 MHz channel   Mode2 0 8 2 Mbps 16 MHz channel   Mode1 0 8 2 Mbps 16 MHz channel   Mode2 0 16 5 Mbps 32 MHz channel   Mode1 0 16 5 Mbps 32 MHz channel   Mode2 0 16 60 Mbps 64 MHz channel   Mode1 0 16 60 Mbps 64 MHz channel   Mode2 0 16 166 Mbps 32 MHz channel   Mode2 1 4 8 Mbps 64 MHz channel   Mode1 1 4 8 Mbps 64 MHz channel   Mode2 1 16 77 Mbps Error Floor 10-12 Maximum packet size 1916 bytes Latency (DS3, T1/E1) 1ms, typical Link Security 96-bit proprietary AES 128 and 256 encryption Management HTTP GUI, CLI/Telnet, SNMPv3 Regulatory Compliance FCC 15.247 FCC 15.407 IC RSS-210 Physical Physical Configuration Single-piece Indoor Unit (IDU) Dimensions (H x W x D) 1.5 RU: 2.63 x 17 x 14 inches (6.7 x 43.2 x 35.6 cm) Operating Temperature -40 to +65 degrees C -40 to +149 degrees F Full Spec Temperature -40 to +60 degrees C -40 to +140 degrees F Weight 12 pounds; 5.5 kg Altitude 15,000 feet; 4.6 km Humidity 95% non-condensing Environmental GR-1089-CORE intra-building Interfaces RF N-type (F), Impedance: 50 ohms DS3 (x1)****** RJ48C/RJ45 (F) DS3 Impedance 75 ohms, unbalanced DS3 Line Codes B3ZS DS3 Clocking Speed 44.736 Mbps DS3 Compliance ANSI T1.102-1987; GR-49T-CORE T1/E1 (x16)******* RJ48C/RJ45 (F) T1 Impedance 100 ohms, balanced T1 Line Codes AMI, B8ZS, selectable per channel T1 Clocking Speed 1.544Mbps T1 Compliance ANSI T1.102-1987 GR-49T-CORE E1 Impedance 120 ohms, balanced E1 Line Codes HDB3 E1 Clocking Speed 2.048 Mbps E1 Compliance CEPT-1; G.703; ITU-T-G703 Loopback Modes Remote Internal Remote External Local Line Ethernet (x2) RJ45 (F), auto-MDIX Interface Speed 10/100BaseT Duplex Half, Full, Auto Compliance 802.3 Console (Serial) 9-pin Sub-D (F) Interface Speed 9600 bps Compliance EIA-574 (RS-232) Alarm 9-pin Sub-D (F) Inputs (2) TTL/Closure Outputs (2) Relay (Form C) Sync (In and Out) RJ45 (F) Signaling Internal Sync, 1pps (GPS) DC Power 6-pin barrier strip Input Voltage ±20-60VDC Consumption <45W (48V :<0.9A, 24V:<1.8A) AC Power Adapter EIC-to-NEMA 5-15 Input 100-240VAC, 1.5A Output 48VDC, 1.5A, 72W System Components Complete link******** Two terminals each with AC adapter & accessory kit Single terminal One terminal with AC adapter & accessory kit Accessory kit DC power connector, rack and grounding hardware (spare) AC adapter AC adapter (spare) GPS sync kit GPS antenna and mounting bracket (optional) *   Not all frequency bands are authorized or available for use in all countries. Consult your Exalt Communications representative for details. **   16xT1/E1, DS3, or 200Mbps upgrade required ***   Figure listed is actual aggregate user throughput, maximum, as measured at layer 2. T1/E1/DS3 circuits may be enabled one at a time as needed, subtracting 3.1, 4.1, or 89.5Mbps respectively from the aggregate user throughput. Some combinations of frame size, link distance, TDM enabling, bandwidth, mode and desired latency will result in reduced maximum aggregate throughput. ****   Base configuration: 100Mbps (32MHz Mode 2) with 4xT1/E1+0xDS3+10/100BaseT *****   Residual capacity if indicated TDM capacity has been enable ******   Capacity may be increased from 0xDS3 to 1xDS3 via separately purchased software option. *******   Capacity may be increased in groups of 4xT1/E1 via separately purchased software options. ********   Two complete links (4 terminals) required for MHS protectionn along with Exalt MHS kit and software support. Consult your Exalt Sales representatives for availability.