The EX-16s split-mount microwave radios from Exalt Communications are carrier-class, software configurable systems designed with the same strict carrier-class requirements as the all-indoor EX-i and the all-outdoor EX-r series platforms. With future-proof upgradeability and configuration control for channel bandwidth, modulation, and TDM/IP capacity via software, there is no need for field replaceable plug-ins or downtime to upgrade capacity or migrate TDM traffic to emerging |
The EX-16s series 16-100F and 16-100E IDUs provide software expandability from 4 to 16 T1/E1 and a smooth upgrade path to higher capacity Ethernet services. TDM capacity may be conveniently expanded in groups of four ports via firmware option. And, only Exalt delivers market-leading security with AES encryption and secure SNMPv3 management (Firmware upgrade required). Configurable in standalone 1+0 or monitored hot-standby 1+1 protection mode, the EX-s series also features enhanced fault-management and diagnostic features.
The EX-s split-mount microwave radios from Exalt Communications are carrier-class, software configurable systems designed with the same strict carrier-class requirements as the all-indoor EX-i and the all-outdoor EX-r series platforms.
Features:
- Own and control your spectrum
- Connect locations in days, not weeks
- Carry voice and Ethernet simultaneously
- Improve manageability with SNMPv3
- Reduce installation and maintenance
- Secure licensed wireless backhaul links
- Future-proof licensed backhaul connections
IDU Specifications:
|
Physical |
|
Dimensions (H x W x D) |
2.63 x 17 x 14 inches; 6.7 x 43.2 x 35.6 cm |
|
Weight |
11 pounds; 5.1 kg |
|
Humidity |
95% non-condensing |
|
Interfaces |
|
IF (IDO to ODU) |
N-type Female; 50 ohms |
|
T1/E1 (x16)* |
RJ48C/RJ45 (F) |
|
T1 Impedance |
100 ohms, balanced |
|
T1 Line Codes |
AMI, B8ZS, selectable per channel |
|
T1 Clocking Speed |
1.544Mbps |
|
T1 Compliance |
ANSI T1.102-1987; GR-499-CORE |
|
E1 Impedance |
120 ohms, balanced |
|
E1 Line Codes |
HDB3 |
|
E1 Clocking Speed |
2.048 Mbps |
|
E1 Compliance |
CEPT-1; G.823, ITU-T-G703 |
|
Loopback Modes |
Remote Internal, Remote External, Local Line |
|
Ethernet (x2) |
RJ45 (F), auto-MDIX |
|
Interface Speed |
10/100BaseT |
|
Duplex |
Half, Full, Auto |
|
Compliance |
802.3 |
|
Console (Serial) |
9-pin Sub-D (F) |
|
Interface Speed |
9600 bps |
|
Compliance |
EIA-574 (RS-232) |
|
Alarm |
9-pin Sub-D (F) |
|
Inputs |
(2) TTL/Closure |
|
Outputs |
(2) Relay (Form C) |
|
Sync (In and Out) |
RJ45 (F) |
|
Signaling |
Internal Sync, 1pps (GPS) |
|
DC Power |
6-pin barrier strip |
|
Input Voltage |
±20-60VDC |
|
Consumption |
<70W (48V :<1.5A, 24V:<3.0A) |
|
AC Power Adapter |
EIC-to-NEMA 5-15 |
|
Input |
100-240VAC, 1.5A |
|
Output |
48VDC, 2A, 100W |
* Capacity may be increased in groups of 4xT1/E1 from 4 to 16 via separately purchased software option. |