This is a single linear polarization directional panel antenna with vertical or horizontal polarization. The antenna meets or exceeds IP67 and NEMA4 weatherproofing requirements. The antenna consists of a patented low cost, high performance circuit design that meets ETSI TS1 thru TS5 Range 1 specifications. The circuit is enclosed in a low profile, UV stabilized ABS plastic radome with aluminum backplane for superior weatherability. The antenna circuit is DC grounded to aid in lightning protection. Two different custom backplane configurations are currently available, a stand alone version with pole/wall mounting kit will be available soon. |
Features:
- High gain, low cost, patented circuit design.
- Low profile and rugged design for outdoor use.
Specifications:
|
Electrical |
|
Frequency Range |
3.4-3.6 GHz |
|
Gain |
20 dBi |
|
3dB Beamwidth Vertical/Horizontal |
14 deg / 14 deg |
|
Polarization |
Single linear, horizontal or vertical |
|
VSWR |
less then1.5:1 |
|
Front-to-Back Ratio |
>29 dB |
|
Cross Polarization |
>19 dB |
|
Power Rating |
30 watts |
|
Impedance |
50 ohms |
|
Lighting Protection |
DC ground |
|
Connector Type |
Integral type N jack or integral 6in (152mm) low loss jumper cable w/SMA Plug |
|
Mechanical and Environmental |
|
Length x Width x Depth |
13.3 in x 13.3 in x 1.0 in (338 mm x 338 mm x 25.4 mm) |
|
Weight |
1.7 lb (0.8 kg) |
|
Backplane |
Aluminum |
|
Radome |
UV stabilized ABS plastic |
|
Wind Survivability |
125 mph (200 kmph) |
|
Wind Load |
1.23 sq ft (0.12 sq m) |
|
Operating Temperature Range |
-49 F to +149 F (-45 C to +65 C) |
RF Patterns:
| Vertical Cut, typ. |
Horizontal Cut, typ. |
 |
 | |