Features:
- High gain, low cost, patented circuit design
- Low profile and rugged design for outdoor use
- Weather tight, heavy duty die-cast compartment behind antenna for directly integrating electronics
- Meets IP67 waterproofing requirements
- High strength mounting bracket is included
|
Specifications:
|
Electrical |
|
Frequency Range |
902-928 MHz |
|
Gain |
12.5 dBi |
|
3dB Beamwidth Vertical/Horizontal |
42 deg / 42 deg |
|
Polarization |
Single linear, horizontal or vertical |
|
VSWR |
less then 1.7:1 |
|
Front-to-Back Ratio |
>25 dB |
|
Cross Polarization |
>20 dB |
|
Power Rating |
30 watts |
|
Impedance |
50 ohms |
|
Lighting Protection |
DC ground |
|
Connector Type |
Integral SMA jack |
|
Mechanical and Environmental |
|
Antenna Dimensions, Length x Width x Depth |
15.4 in x 15.4 in x 1.7 in (391 mm x 391 mm x 43 mm) |
|
Outer Enclosure Dimensions, Length x Width x Depth |
9.84 in x 10.22 in x 2.7 in (250 mm x 260 mm x 69 mm) |
|
Inner Enclosure Dimensions, Length x Width x Depth |
8.05 in x 7.28 in x 2.24 in (204 mm x 185 mm x 57 mm) |
|
Combined Weight |
4.50lb (2.0kg) |
|
Backplane |
Aluminum |
|
Radome |
UV stabilized ABS plastic |
|
Wind Survivability |
125 mph (201 kmph) |
|
Wind Load |
1.23 sq ft (0.12 sq m) |
|
Operating Temperature Range |
-49 F to +149 F (-45 C to +65 C) |
|
Pole Mount Diameter Range |
0.75 in to 2.0 in (19 mm to 51 mm) | |