\ RF Accessories, Power Supplies, Towers, Masts \ Lighting Arrestors, Splitters
Email This Page to a Friend
Proxim Power over Ethernet Surge Arrestor for Tsunami Multipoint 20/60, QuickBridge 20, 60 and QuickBridge II.
Winncom PN # ALPU-TSU Manufact PN # ALPU-TSU List Price: Login/Call Login and Stay on this page
Despite built in protection that is provided on all Tsunami equipment, lightning can damage outdoor equipment. Transtector Systems ALPU-TSU (PN 1101-TSU) Surge Suppressor has been developed exclusively to protect all Tsunami Multipoint and QuickBridge products.
The ALPU-TSU surge suppressor is a high-speed, high-current solid state device designed to protect (1) Ethernet CAT-5 line and (1) 48 VDC lines. The ALPU-TSU uses only silicon avalanche suppression diodes (SASD). It connects to the service in a pass through configuration. The input and output connections are made at two “screw type” terminal blocks. Both the input and output harnesses pass into the suppressor housing via waterproof strain reliefs. The molded plastic enclosure is also waterproof, and features integrated mounting holes that are concealed by the cover and integrated gasket. PERFORMANCE REQUIREMENTS: Electrical Service Ethernet Transfer rate CAT-5 10/100Mb/s Configuration 2 pair Input Connection Screw-Term Block (22-16 AWG) Protection Modes Line to Line, Line to Ground Maximum Continuous Operating Voltage 13 VDC 48 VDC Service Voltage 48 VDC Configuration 4 wire Input Connection Screw-Term. Block (22-16 AWG) Protection Modes Line to Line, Line to Ground Maximum Continuous Operating Voltage 60 VDC Electrical Performance Ethernet Testing Ipk(Tested to IEEE 10/1000us Long Wave) 200A peak Ipk(Tested to IEEE 8/20us Combination Wave) 2500A peak Response Time (Max) 5 nanoseconds  Standby Power (Max) < 0.5 Watt Peak Power 5000 Watts 48 VDC Testing   Ipk(Tested to IEEE 10/1000us Long Wave) 200A peak Ipk(Tested to IEEE 8/20us Combination Wave) 2500A peak Response Time (Max) 5 nanoseconds Standby Power (Max) < 0.5 Watt Peak Power 20,000 Watts ENVIRONMENTAL  Operating Temperature -40°C to +80°C Storage Temperature -40°C to +80°C Relative Humidity 99% (non-condensing) MECHANICAL/INSTALLATION Enclosure dimensions: The suppressor is housed in a molded plastic enclosure that is 6.13 in long, 4.5 in wide and 2.5 in tall. The enclosure mounts with #6 hardware. Mounting data: See diagram below. Wiring data: The ALPU-TSU is designed to accept (2) multi-conductor cables with outside diameter ranging from ј” to 3/8”.