The Motorola MGPS is designed to provide protection for the CMME module on 360 degree array systems for all GPS signal lines. |
ALPU-MGPS surge suppressor шы high-speed, high-current solid state device designed to protect (8) CAT-5 Ethernet/Signal lines and (8) 24 VDC lines. The ALPU-MGPS useы only silicon avalanche suppression diodes (SASD). They connect to the service in a pass through configuration. All input and output connections terminate at two “screw type” terminal blocks. All wire harnesses pass into the suppressor housing via waterproof strain reliefs. The aluminum enclosure is also waterproof, and utilizes a neoprene gasket plus a “membrane vent” to release any build-up of pressure and moisture due to cable wicking and enclosure heating.
Specification:
|
Electrical |
|
Transfer rate |
CAT-5, 10/100 Mb/s |
|
Configuration |
2 pair |
|
Input Connection |
Term Block (24-16 AWG) |
|
Number of connector positions |
Up to 32 |
|
Protection Modes |
Line to Line, Line to GND |
|
Maximum Continuous Operating Voltage |
13 VDC |
|
Service Voltage |
24 VDC |
|
Configuration |
4 wire |
|
Input Connection |
Term Block (24-16 AWG) |
|
Number of connector positions |
Up to 32 |
|
Protection Modes |
Line to Line |
|
Maximum Continuous Operating Voltage |
40 VDC |
|
Environmental |
|
Operating Temperature |
-40°C to +80°C |
|
Storage Temperature |
-40°C to +80°C |
|
Relative Humidity |
99%(non-condensing) |
Installation:
|