\ Wireless Broadband MESH Products
Email This Page to a Friend
Proxim MeshMax 5054WM Tri-radio. Ruggedized Multiservice unit with following functions: MP.11 (5GHz) subscriber, 802.11a/b/g WiFi Access Point with MESH capability. Universal power Supply. (Mnf.part # 9200-AM0 Special Order Item, Call for Availability.
Winncom PN # 9200-AM0 Manufact PN # 9200-AM0 List Price: Login/Call Login and Stay on this page
Proxim’s MeshMAX™ product line integrates three technologies, WiMAX, Wi-Fi® Mesh and Wi-Fi, in one small unit! MeshMAX is a tri-radio, outdoor device offering Wi-Fi connectivity for access, Wi-Fi mesh gateway for network redundancy and a high capacity, carrier-class WiMAX link for backhaul. The convergence of these three technologies in one unit delivers end-to-end QoS for triple-play applications, a reduction in total cost of ownership and investment protection for future developments in WiMAX!
Experienced in WiMAX and Wi-Fi Applications Drawing on Proxim’s expertise in WiMAX and Wi-Fi Mesh Technologies, the MeshMAX product line encapsulates the best in class features of the award-winning Tsunami WiMAX and ORiNOCO mesh product families. Proxim is uniquely positioned to offer this leading-edge product given our extensive experience in delivering Wi-Fi and WiMAX solutions. End to end product portfolio consisting of WLAN, Wi-Fi Mesh, WiMAX and Point-to-Point Tri-radio design provides one radio for WiMAX backhaul for distribution, one radio for Wi-Fi mesh link and one radio for exclusive Wi-Fi access traffic End-to-end QoS from access to distribution to support voice and video IEEE 802.11e draft QoS support for access and enhanced QoS on mesh link IEEE 802.16e QoS support for WiMAX wireless backhaul link 802.1D to 802.1p priority mapping and 802.1D to IP DSCP mapping Simplifies Network Architecture, Deployment and Management Reducing network complexity, minimizing time of deployment and increasing ease of installation, the MeshMAX accelerates the network operator’s time to money. Less nodes to install, deploy and manage Single management interface reduces time for service and support Provides consistent deployment and user experience to Tsunami™ MP.11, Tsunami MP.16 and ORiNOCO Mesh Access Point product lines Significantly Reduces Total Cost of Ownership (TCO) Lowest deployment cost per square mile Reducing the number of nodes decreases installation and management time and minimizes associated costs Low power consumption and solar power options reduce operating expenses Investment Protection WiMAX and mesh networks consisting of the Tsunami WiMAX products, ORiNOCO Mesh Access Points and MeshMAX (IEEE 802.16e) radios enable a service provider to establish a customer base and capture a head start on securing the WiMAX mobile market. Current MeshMAX product features WiMAX QoS and 802.16e class roaming with unprecedented mobility capabilities MeshMAX platform enables support of all mobile WiMAX and Wi-Fi clients Specifications: PRODUCT MODELS 9100-XX MeshMAX 3500M2 Tri-radio, WiMAX subscriber and Wi-Fi® Mesh access point 9101-XX MeshMAX 3500W2 Tri-radio, WiMAX subscriber and Wi-Fi access point RF MODULATION AND OVER THE AIR DATA RATES OFDM (Orthogonal Frequency Division Multiplexing)   5GHz band 2.4GHz band 3.5 GHz Band   3.5MHz 7MHz BPSK 6 and 9 Mbps 6 and 9 Mbps 1.4 Mbps 2.8 Mbps QPSK 12 and 18 Mbps 12 and 18 Mbps 2.8 and 4.2 Mbps 6.6 and 8.5 Mbps 16-QAM 24 and 36 Mbps 24 and 36 Mbps 5.6 and 8.5 Mbps 11.3 and 16.9 Mbps 64-QAM 48 and 54 Mbps 48 and 54 Mbps 11.3 and 12.7 Mbps 22.6 and 25.4 Mbps DSSS (For 2.4GHz radio only) DBPSK N/A 1 Mbps N/A N/A DQPSK N/A 2 Mbps N/A N/A CCK N/A 5.5 and 11 Mbps N/A N/A WIRELESS PROTOCOL 802.16d for WiMAX backhaul 802.11a, 802.11b and 802.11g for Wi-Fi Access Proxim ORiNOCO Mesh Creation Protocol (OMCP) for mesh backhaul extension BANDS SUPPORTED 3.4 - 3.6 GHz for WiMAX radio 5.15 - 5.85 GHz and 2.412 - 2.472 GHz for Mesh and Wi-Fi radios CHANNEL BANDWIDTH 3.5MHz and 7MHz for WiMAX 20MHz for Mesh backhaul and Wi-Fi Access Infrastructure WIMAX CHARACTERISTICS Duplexing Mode – TDD NLOS and Interference Mitigation Features – OFDM 256FT, Adaptive Modulation, FEC Frame Duration – 5, 10 and 20ms DSSS DEVICE INTERFACE Wired Ethernet Auto-sensing 10/100BASE-TX Ethernet Antenna Connector 1 Standard Type-N Female 5 GHz Mesh and Wi-Fi radio 1 Standard Type-N Female 3.5 GHz WiMAX radio 1 Standard Type-N Female 2.4 GHz Wi-Fi radio NETWORK ARCHITECTURE TYPE Infrastructure TRANSMIT POWER SETTINGS 3.5GHz : +21dBm 5.0GHz : +18dBm 2.4GHz: +20dBm Output Power Values will have a tolerance of +/- 1.5 dB Output Power Attenuation (for Mesh and Wi-Fi radio): 0 – 12 dB, in 1 dB steps SOFTWARE SPECIFICATIONS WiMAX Subscriber Features Local Monitoring: • Serial CLI • Logging to serial port, flash, RAM or Syslog server Remote Monitoring • Telnet CLI • HTTP • TFTP • SNMPv1, SNMPv2 • MIB-II, Proxim MIBs, Bridge MIB, 802.16MIB, Etherlike MIB Remote Management Access • Multi Level Password (user, administer, installer, factory, engineering) Authentication • RADIUS Authentication and Provisioning • MAC Address Table VLAN • 802.1Q VLAN tagging and filtering support • Transparent passing of 802.1Q-compliant VLAN tagged frames QoS • Asymmetric bandwidth support • Packet Classification capabilities – 801.1D/802.1Q/802.1p priority; IPTOS; VLAN ID; IP Source/Destination Address; Source/Destination port; Ethernet Source Destination Address; IP Protocol and Ethertype • Scheduling – Best Effort; Universal Grant Services; per service flow scheduling; priority, jitter and latency control for voice, video and data; min/max bandwidth enabling Mesh and Wi-Fi Features Remote Management • SNMP v1; SNMP v2c and SNMP v3 • MIBs Supported: ORiNOCO; rfc1213; rfc1643; 802.11i-D3; IANAifType-MIB; MIB802 • DHCP • Telnet • HTTP • TFTP • BootP Secure Configuration Support • SNMPv3 • HTTPS • SSH • RADIUS Based Management Access authentication • Encrypted storage for security and management parameters Authentication • 802.1X support including PEAP, EAP-TLS, EAP-TTLS EAP-SIM, and other EAP methods that conform to RFC 3748 to yield mutual authentication and dynamic per-user, per-session encryption keys • RADIUS-based MAC address authentication • Dynamic MAC address control list, automatically updated without rebooting AP Encryption • 802.11i support for CCMP/AES keys of 128 bits (WPA2) • TKIP encryption • Support for WEP keys of 64 and 128 bits Message Authentication • 802.11i AES message authentication with 128 bit keys • TKIP with 128 bit Michael Message Integrity Check Intrusion Detection • Rogue AP and client detection • Detect switch port of rogue access point when used in conjunction with ProximVision™ • Detect MIC intrusion attacks 802.11 MAC level functionality • Multiple SSID and BSSID • Auto Channel Select • Dynamic Frequency Selection (DFS) • 802.11d support • Transmit power control • QoS support for mesh backhaul and access • Closed system • Channel Blacklist • Turbo mode • Super mode Bridging and Filtering • IEEE 802.1d Bridging • VLAN Support • WDS Relay • Protocol Filtering • Modified Proxy ARP support • Multicast/Broadcast Storm Filtering • TCP/UDP Port Filtering • Intra-BSS Clients blocking • Packet Forwarding • VPN filtering Network Layer • DHCP Client • DHCP Server • DHCP Relay Agent • Inter Access Point Protocol (IAPP) • Link Integrity • Syslog • RADIUS Authentication • RADIUS Accounting Support • DNS Client • SNTP • TFTP Client • Telnet Server • HTTP Server • SNMPv1/SNMPv2/SNMPv3 • Scan and Change STATUS LEDS Two indicators on the RJ-45 connector to indicate power/Ethernet traffic and mesh traffic LOCAL CONFIGURATION SUPPORT RS-232 Serial port • RJ11 port built-into the unit • DB9 Female via a converter (included) ENVIRONMENTAL Water and Dust Proof • NEMA4 ELECTRICAL POE Power Injector • Custom Power over Ethernet (802.3af compatible) • Input: Voltage 110 to 250 VAC (47-63Hz) • Output: 48V @ 420mA MAX (injected into the Cat-5 Cable) • Pin for reset to factory default of mesh AP AC Power Support • 110/240 VAC light pole power tap (purchased separately) DIMENSIONS (PACKAGED UNPACKAGED) 14.57 x 13.70 x 8.19 in (370 x 348 x 208 mm) 10.5 x 10.5 x 3.25 in (267 x 267 x 83 mm) WEIGHT (PACKAGED UNPACKAGED) 12 lbs (5.44 kg) 5.5 lbs (2.49 kg) ENVIRONMENTAL OPERATING •  -33є to 60єC • 100% relative humidity (non-condensing) • Wind loading: 125mph STORAGE • -55є to 80єC (-41є to 176є Fahrenheit) • 100% humidity PACKAGE CONTENTS One MeshMAX 3500M2 Unit or One MeshMax 3500W2 Unit One wall/ pole mounting bracket One Power-Over-Ethernet injector and power cord One Ethernet cable weather-proof plug One Cable termination kit One Installation CD-ROM with Software and Documentation MTBF 100,000 hours