Outdoor high gain antenna for point-to-multipoint applications. This antenna is meant for use with the Tsunami MP.11 BSU. It will create wireless cells around the central site providing access for all the Subscriber Units. |
|
Electrical specifications
|
Antenna |
|
Frequency range |
2400 – 2485 MHz |
|
VSWR |
Nominal 1,6 : 1 Maximum 2,0 : 1 |
|
Nominal impedance |
50 W |
|
Gain |
10 dBi ±1 dBi |
|
Front to back ratio |
N/A. |
|
Polarisation |
Vertical |
|
Half power elevation beamwidth |
8 degrees |
|
Power |
10 Watts |
|
Cable |
|
Type |
RG 303 |
|
Connector |
|
Type |
Standard N-connector, Female jack |
Mechanical specifications
|
Antenna |
|
Length |
914 mm |
|
Mounting plate |
Aluminium |
|
Max mast diameter |
41,3 mm |
|
Min. mast diameter |
28,6 mm |
|
Material |
Plastic tube |
|
Mounting method |
SS U-bolts, 51 mm OD max. |
|
U-bolt |
Stainless steel |
|
Nut (locknut) |
N/A |
|
Cable |
|
Length |
250 mm |
|
Conductor |
Copper |
|
Dielectric |
PE |
|
Shielding |
Copper braid |
|
Jacket |
FEP |
|
Jacket colour |
Tan |
|
Connector |
|
Coupling |
5/8"-24 thread |
|
Braid and jacket cable attachment (for crimp types) |
Hex braid crimp |
|
Center conductor cable attachment |
Solder |
|
Contact support |
100 % captive pin |
Environmental Specifications
|
Antenna |
|
Wind rating |
120 Km/hour |
|
Wind survival
No ice
Ѕ inch ice |
240 Km/hour
200 Km/hour |
|
Temperature range |
-40 ° C to +60 ° C |
|
Relative humidity range |
0 – 100% |
|
Temperature change |
2,78 ° C/minute |
|
Storage environment |
Dry, -40 ° C to +60 ° C |
|
Shock testing |
Passed ITSA testing |
|
Cable |
|
Flame rating |
UL 1581 Vertical tray flame test |
|
Max. temperature rating |
60 ° C | |