\ Wireless WAN/LAN Multipoint. 900 MHz, 2.4 GHz, 4.9 GHz, 5 GHz and 3.5 GHz WiMAX Products \ 5.15 - 5.85 GHz Unlicensed Frequency Band Wireless Point-to-MultiPoint (PtMP) Products
Email This Page to a Friend
Motorola MOTOwi4 Point-to-Multipoint 5.4 GHz Canopy 400 OFDM Wireless Access Point with Integrated Antenna, Up to 21 Mbps Throughput. P/N: 5440APAA
Winncom PN # 5440APAA Manufact PN # 5440APAA List Price: Login/Call Login and Stay on this page
The Canopy 400 Series AP and SM products operate in the 5.4 GHz spectrum. In many parts of the world, this newly available spectrum gives operators 255 MHz of usable frequency band—that’s almost double the amount available in the 5.7 GHz band. The Canopy 400 Series offers a fast, cost-conscious way to enter this exciting and advantageous spectrum.
GPS Synchronization. The 400 Series is equipped with powerful GPS synchronization that significantly reduces self-interference, allowing for co-location applications with existing Canopy networks. Co-location capability enables the system to be deployed as a 5.4 GHZ frequency band overlay network. Deployment Options. The standard Canopy 400 configuration uses an integrated 60-degree antenna. In addition, the Canopy 400 Series is also available as a connectorized solution, allowing operators of overlay, expanded or greenfield networks to choose the antennas they prefer. Common Canopy Environment. The 400 Series can lower the cost of ownership for existing Canopy network operators because the 400 Series APs and SMs use the same Release 8.x application software. They also use the same power supplies, brackets, surge suppressors, and Cluster Management Module (CMM) as other Canopy components—reducing training, support and inventory costs. For simplified network management, 400 Series products are also compatible with the Prizm Element Management System. Dynamic Frequency Selection (DFS). Because the 5.4 GHz frequency band is shared with certain government radar systems, networks operating in the band must have DFS capabilities for resolution of conflicts. Canopy 400 Series APs and SMs meet ETSI DFS Standard for Europe and Brazil, and the FCC Standard for the United States and IC Standard for Canada. Specifications: Canopy Part Number 5440AP Description CAP54400-400 Series AP with integrated antenna Market Availability Now Available in EMEA Signaling Rate 35 Mbps Maximum Typical LOS Range up to 5 miles (8 km) at lowest modulation Typical Aggregate Useful Throughput 21 Mbps (Max) Frequency range of band U-NII 5470-5720 MHz Non-overlapping Channels up to 25 Channel Width 10 MHz Modulation Type 1X = QPSK (3/4); 2X = 16QAM (3/4);3X = 64QAM (3/4) Channel Spacing Configurable on 5MHz increments Encryption DES Latency 5-7 msec Nominal Receiver Sensitivity (dbm typical) 1X: -89 dBm, 2X: -78 dBm, 3X: -70dBm Antenna Gain (dBi) 17dBi EIRP (dBm) 27dBm max DC Power (typical) <12.6W at 29.5VDC Antenna Beam Width 90 degree coverage for 4-sector applications Mean Time Between Failure (MTBF) >40 years Temperature -40 degree C to +55 degree C (-40 degree F to +131 degree F ) Humidity: 0 to 95%, non-condensing Wind Survival 190km/hour (118mi/hour) Dimensions 28.75" H x 8.25" W x 11" D (73 cm H x 20.96cm W x 27.94cm D) Weight ~13 lbs. (5.91 kg) Access Method Time Division Duplexing/Time Division Multiple Access (TDD/TDMA) Interface 10/100BaseT, half/full duplex, rate auto negotiated (802.3 compliant) Protocols Used IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP Network Management HTTP, Telnet, FTP, SNMPv2 (compatible with Prizm 3.1 or later and CNUT 3.0 and later) FCC ID ABZ89FT7629 Industry Canada Certification Number 109W-5440 CE "CE" marked & compliant to EN301 893, Implements DFS & TPC. DoCs are available at http://www.canopywireless.com/doc.php