The Motorola Canopy 5.4 GHz Access Point Module (AP) Module operates with a raw data rate of 10 Mbps and has a range of approximately ten miles (5.4 GHz SM with reflector). Each AP requires a 24-volt power Configuration Guide source and uses a single 10/100 BaseT Half/Full duplex connection to interface into the CMM or appropriate network connection. |
Specifications:
|
Canopy Part Number |
5401AP |
|
Description |
5.4 GHz AP AES |
|
Signaling Rate |
10 Mbps |
|
Typical LOS Range |
3.2 km (2 Miles) |
|
Typical Aggregate Useful Throughput |
7 Mbps |
|
Frequency range of band |
U-NII 5470-5725 MHz |
|
Channel Width |
20 MHz |
|
Modulation Type |
High Index 2-level Frequency Shift Keying (FSK) optimized for interference rejection |
|
Channel Spacing |
configurable on 5 MHz increments |
|
Encryption |
AES capable |
|
Latency |
15 msec |
|
Carrier to Interference ratio (C/I) |
~3dB @ 10 Mbps, |
|
Nominal Receiver Sensitivity (dbm typical) |
-86 dBm |
|
Antenna Gain (dBi) |
7 dBi |
|
EIRP (dBm) |
30 dBm |
|
Equivalent Isotropic Radiated Power (EIRP) |
Adjustable to 1W |
|
DC Power (typical) |
0.3 A @ 24 VDC = 7.2 W |
|
Mean Time Between Failure (MTBF) |
40 yr |
|
Temperature |
-40° C to +55° C (-40° F to +131° F) |
|
Wind Survival |
190 km/hr (118 miles/hr) |
|
Dimensions |
11.75 in H x 3.4 in W x 3.4 in D (29.9 cm H x 8.6 cm W x 8.6 cm D) |
|
Weight |
.45 kg (1 lb) |
|
Access Method |
Time Division Duplexing/Time Division Multiple Access (TDD/TDMA) |
|
Interface |
10/100 Base T, half/full duplex. Rate auto negotiated (802.3 compliant) |
|
Protocols Used |
IPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP |
|
Network Management |
HTTP, TELNET, FTP, SNMP Version 2c |
|
FCC ID |
ABZ89FT7623 |
|
Industry Canada Certification Number |
IC109W-5400 | |