|
Description
Hoisting grips are designed
for hoisting cable or waveguide safely up a tower so that mechanical
connection to an antenna can be made. The grip is split and must be laced
together on the cable or waveguide. When the cable or waveguide is in
position and fastened to the tower members, the hoist line can be removed.
The hoisting grip may then be either attached to the tower as additional
support for the cable or waveguide or removed. Place the hoisting grip at
the proper location on the cable or waveguide (
look at PDF ) Allow a sufficient length of cable or waveguide
leader between the connector and the grip to reach the antenna input |
|