RWR-600 jumper assembly, 3-ft., Type "N" Male
Manufacturer PN #: RWR-600/3/NM/NM
This part number is currently unavailable. Please contact Winncom at 1-888-WINNCOM for a comparable product.
Radio Waves offers LMR cable, which is a high performance, flexible, low loss 50-Ohm cable for applications such as short antenna feeder runs, jumper assemblies in wireless communications systems, and as IF cable runs in split radio design applications. LMR® cable designs feature a closed cell polyethylene foam dielectric for low loss characteristics. Aluminum tape is employed for a flexible shield. A tinned copper outer braid provides a means for grounding and connector retention, and a heavy-duty polyethylene outer jacket gives the cable UV and weather protection, as well as ensuring a long lasting reliable product.
LMR cable is available in a variety of diameters. The cable can be ordered in the desired length as an assembly, or purchased as separate cable and connectors, to be cut and connectorized in the field.
LMR cable is specified for use at frequencies up to 6 GHz. Depending on the model, some LMR cables have cut-off frequencies up to 16 GHz. Please consult the factory for applications above 6 GHz.
Flexible: With a bend radius of 1-inch for LMR-400, 1.5-inches for LMR-600, 3-inches for LMR-900, and 6.5-inches for LMR-1200, LMR cable can be easily routed into and through tight spaces without kinking. The bonded tape outer conductor provides superior flexibility and ease of bending compared to competitive cables.
Low Loss: LMR-400, and LMR-600 cable have the lowest loss of any ``superflex'' type cable on the market. The use of high velocity gas-injected closed cell foam dielectric and the bonded aluminum tape outer-conductor in the design of the LMR cable ensure the low loss performance. LMR-900 and LMR-1200 cable has loss characteristics approaching that of
7/8-inch corrugated copper cable at a fraction of the cost.
Weatherproof: The UV protected black polyethylene jacket makes the cable rugged and resistant to the full range of outdoor environments.
RF Shielding: The bonded aluminum tape outer conductor is overlapped to provide 100% coverage, resulting in >90 dB RF shielding, and excellent interference immunity.
Phase Stability: The intimately bonded structure and closed foam dielectric of the LMR cable provides excellent phase stability over temperature and with bending. The high velocity dielectric results in superior phase stability as compared with solid and air-spaced dielectric cables.
|Part #||Recommended Quantity||Qty on Shelf
Qty on PO
If you would like to place an order by phone please call 1-888-WINNCOM (946-6266) (or +1 440 498 9510 for International)
- Cables and Cable Assemblies
- Distributed Antenna Systems
- Installation and Diagnostic Tools
- Licensed Wireless Point to Multipoint Systems
- Licensed Wireless Point to Point Systems
- MESH Wireless Equipment
- Network and Network Management Systems
- Site Solutions
- Unlicensed Wireless Point to Point Systems
- Video Surveillance Products
- Winncom Professional Services
- Wireless Broadband Wi-Fi Products WLAN
- Wireless WAN and LAN Point to Multipoint Systems
- ARC Wireless
- Axis Communications
- BridgeWave Communications
- Cambium Networks
- Cel-Fi by Nextivity
- Cisco Systems
- DDB Unlimited
- Exalt Communications
- Extreme Networks
- GoNet Systems
- HP ProCurve Networking
- I2C Technologies
- Integra Enclosures
- MARS Antennas
- Mercury Networks
- Mobile Mark
- MP Antenna
- MTI Wireless Edge
- Novi Security
- Proxim Wireless
- Radio Waves Inc
- Redline Communications
- ROHN Products LLC
- Sabre Industries Inc
- SIAE MICROELETTRONICA
- SkyPilot by Trilliant
- Solis Energy
- SPINNER Group
- Transtector PolyPhaser
- Wade Antenna
- Winncom Technologies
- Wireless Beehive